CurseForge · Minecraft mod
Zone Cleaner
A powerful server admin tool designed to remove blocks and entities in large areas without server lag. Includes a smart progress bar and an Undo feature.
Quick answer
Which Zone Cleaner release should I use?
Zone Cleaner zone_cleaner-3.1.0-neoforge-1.21.8.jar targets 1.21.8 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.
Where it goes
Is Zone Cleaner required on the client, server, or both?
The project page does not say whether this file belongs on the client, dedicated server, or both.
The source does not explicitly classify this release as client-only or server-only.
What else does Zone Cleaner zone_cleaner-3.1.0-neoforge-1.21.8.jar need?
zone_cleaner-3.1.0-neoforge-1.21.8.jar. Change the file and its required mods may change too.
This file does not list any required mods. Do not add a library just because a different file uses it.
This file does not list any required or optional mods.
Before you install it
Add Zone Cleaner without breaking your instance.
Built for Zone Cleaner zone_cleaner-3.1.0-neoforge-1.21.8.jar. Pick another file and the loader, install side or required mods may change.
- 01
Stick to this file
Use zone_cleaner-3.1.0-neoforge-1.21.8.jar. It targets 1.21.8 with NeoForge; another release may have different loader, side or dependency requirements.
- 02
Bring the mods it needs
This file does not list any required mods. Do not add a library just because a different file uses it.
- 03
Put it on the correct side
The project page does not say whether this file belongs on the client, dedicated server, or both.
- 04
Pick the file you checked
Use the “Get this file” button beside zone_cleaner-3.1.0-neoforge-1.21.8.jar. It opens that exact file at the source.
About this project
What does Zone Cleaner add?
Zone Cleaner
The Ultimate Lag-Free World Editor
Delete millions of blocks without dropping a single TPS.
Zone Cleaner is a server-side administration tool designed to perform massive world editing operations safely. Unlike WorldEdit or vanilla commands which can freeze your server, Zone Cleaner uses a Time-Slicing Engine and Physics Suppression to clean the world while you keep playing.
⚡ The "Ninja" Engine (New in 3.1.0)
The mod has been completely re-architected. It now bypasses standard block updates using Flag 18.
- No Light Recalculation: Removing a mountain won't freeze the server calculating shadows.
- No Physics: Sand and Gravel won't fall, water won't flow, and observers won't trigger.
- Zero Lag: The operation is sliced into tiny micro-tasks spread across server ticks.
🎚️ Aggression Levels (1 to 5)
You are in control. Choose how much CPU power the task is allowed to use by adding a number at the end of the command.
| Level | Name | Description | Use Case |
|---|---|---|---|
| 1 | Ghost | 0.5ms / tick. Invisible background task. | Playing while cleaning. Zero impact. |
| 2 | Safe | 5ms / tick. Smooth and fluid. | Default balanced usage. |
| 3 | Normal | 20ms / tick. Standard speed. | Admin maintenance. |
| 4 | Fast | 50ms / tick. Uses the full tick budget. | When you want it done quickly. |
| 5 | NUCLEAR | 500ms / tick. Forces Lag. | AFK massive destruction. 10x faster than normal. |
🛠️ Commands
Requires Operator Level 4.
1. Define the Zone
For massive areas, use these commands to mark your corners (like WorldEdit).
/pos_start: Sets the first corner at your feet./pos_end: Sets the second corner at your feet.
2. Remove Blocks
Syntax: /remove block <coords> <block> [level]
Clean all Sand in a 5000-block radius from Bedrock to Sky (Level 4 - Fast):
/remove block ~ min ~ ~5000 max ~5000 minecraft:sand 4
Clean a specific zone defined by pos_start/end (Level 1 - Silent):
/remove block pos_start pos_end minecraft:stone 1
Manual coordinates (Level 5 - Nuclear):
/remove block 0 60 0 100 100 100 minecraft:dirt 5
3. Remove Entities
Instantly wipe entities in the selected area.
/remove entity pos_start pos_end all(Kills all mobs/items, keeps players)/remove entity ~ -64 ~ ~100 320 ~100 minecraft:zombie
4. Utilities
/remove stop: Emergency Stop. Instantly kills the current background task./remove undo: Reverts the last operation block-by-block using the safe scheduler.
📉 Compatibility
- Server-Side Only: Clients do not need to install the mod to join.
- Language: Messages are automatically translated based on the player's client language (English & French included).
<details> <summary>📚 Documentation for versions older than 3.1.0</summary>
Performance
Zone Cleaner was engineered from the ground up to respect your server's performance. While other tools execute commands instantly and cause massive lag spikes, Zone Cleaner breaks down every large task into tiny, manageable pieces.
It intelligently monitors your server's Mean-Spike-per-Tick (MSPT) and dynamically allocates a "work budget" for each tick. If the server is busy, it does less. If the server is idle, it does more. The result? Your server stays at a perfect 20 TPS, even while clearing millions of blocks.
Features
- Dynamic Anti-Lag Engine: A scheduler that processes operations progressively based on real-time server performance.
- Smart Undo System: Reverts the last 5 block removal operations using the same lag-free system.
- Action Bar Progress Updates: Get real-time percentage feedback on your action bar.
- Flexible Selections: Use absolute coordinates, relative positions (
~), or world limits (min/max). For larger areas, set points with/pos_startand/pos_end. - Total Control: Each player can only run one task at a time. Stop your current operation instantly with
/remove stop.
Commands
All commands are server-side and require operator permission.
Position Selection For large areas, it's easier to set start and end points first.
/pos_start: Saves your current position as the first corner./pos_end: Saves your current position as the second corner.
Block Removal The core block removal command.
To clear a 100x100 area of stone at y=64:
/remove block 0 64 0 100 64 100 minecraft:stone
To remove all sand in a 50-block radius from your position, from world bottom to top:
/remove block ~-50 min ~-50 ~50 max ~50 minecraft:sand
To drain an ocean using saved positions:
# Go to one corner of the ocean and run /pos_start
# Go to the opposite corner and run /pos_end
/remove block pos_start pos_end minecraft:water
Entity Removal Quickly and safely remove entities from a zone. This command is instantaneous and does not use the anti-lag scheduler.
To remove all zombies in a large area:
/remove entity 0 0 0 1000 255 1000 minecraft:zombie
To clear all hostile mobs from a previously saved zone:
# Set your /pos_start and /pos_end first
/remove entity pos_start pos_end all
(This will not remove players or non-hostile entities unless specified.)
Utilities
/remove undo: Restores blocks from your last removal operation using the lag-free engine. Can be used up to 5 times./remove stop: Immediately cancels your currently running task.
Technical Details
Zone Cleaner's performance is not magic; it's engineering.
- Server-Side Only: No client installation is required.
- Tick-Based Scheduler: Hooks into the
ServerTickEvent.Postto perform work after the main game logic has finished for the tick. - Dynamic Workload Balancing:
- Measures server MSPT in real-time.
- Maintains a rolling average to smooth out momentary spikes.
- Calculates a nanosecond "work budget" for each tick based on available performance.
- The task yields if it exceeds its budget, resuming automatically on the next tick.
- Safe & Synchronous: All block operations occur on the main server thread, guaranteeing world save integrity and preventing concurrency issues.
- Efficient Undo: Uses a memory-efficient
BlockSnapshotrecord and aLinkedListfor fast history tracking of the last 5 operations.
This architecture ensures that Zone Cleaner is a powerful and safe tool for any production server. </details>
Project description from CurseForge.
Pick your setup
Zone Cleaner by Minecraft version and loader
Choose the version and loader you play, then open the matching release.
1.21.4
1 loader build1.21.1
1 loader build1.20.6
1 loader build1.20.4
2 loader builds1.20.1
1 loader build1.19.4
1 loader build1.19.2
1 loader buildCheck the dependencies, then try the file in a copied instance before changing a world you care about.
Recent files
Zone Cleaner versions and loaders
zone_cleaner-3.1.0-neoforge-1.21.8.jar
22 Dec 2025
zone_cleaner-3.1.0-neoforge-1.21.4.jar
22 Dec 2025
zone_cleaner-3.1.0-neoforge-1.21.1.jar
22 Dec 2025
zone_cleaner-3.1.0-neoforge-1.20.6.jar
22 Dec 2025
zone_cleaner-3.1.0-neoforge-1.20.4.jar
22 Dec 2025
zone_cleaner-3.1.0-forge-1.20.1.jar
22 Dec 2025
zone_cleaner-3.1.0-forge-1.19.4.jar
22 Dec 2025
zone_cleaner-3.1.0-forge-1.19.2.jar
22 Dec 2025
zone_cleaner-3.1.0-fabric-1.21.8.jar
22 Dec 2025
zone_cleaner-3.0.1-neoforge-1.21.8.jar
17 Dec 2025
zone_cleaner-3.0.1-neoforge-1.21.1.jar
17 Dec 2025
Looking for an older file? The official CurseForge project page is in Resources.