Back to mods
Footsteps Trail project artwork

CurseForge · Minecraft mod

Footsteps Trail

Leave fading footprints behind you as you explore. Prints sink into sand, snow and mud, or use surface and classic markers. Client-side and fully configurable.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Footsteps Trail release matches 26.2?

Updated today
Best match for your filters footsteps-trail 1.3.0 26.2-neoforge.jar
Game version 26.2
Loader NeoForge

Footsteps Trail footsteps-trail 1.3.0 26.2-neoforge.jar targets 26.2 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.

Where it goes

Is Footsteps Trail required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release NeoForge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Footsteps Trail footsteps-trail 1.3.0 26.2-neoforge.jar need?

footsteps-trail 1.3.0 26.2-neoforge.jar on 26.2. Every mod below is checked against that same setup.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add Footsteps Trail without breaking your instance.

Built for Footsteps Trail footsteps-trail 1.3.0 26.2-neoforge.jar on 26.2. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use footsteps-trail 1.3.0 26.2-neoforge.jar. It targets 26.2 with NeoForge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside footsteps-trail 1.3.0 26.2-neoforge.jar. It opens that exact file at the source.

About this project

What does Footsteps Trail add?

👣 Footsteps Trail

A lightweight, client-side mod that leaves fading footprints behind you as you explore.
Find your way out of a cave, retrace a route through a dense forest, or just enjoy watching your tracks sink into sand and snow.

Footprints preview

✨ Footprint Types

🏜️ Terrain
default
Footprints are pressed into the ground itself as pixel-style boot prints that match the block's texture. Sand, snow and mud take deep prints, grass and dirt compact, stone and wood only scuff, carpets dent, and slime and honey squish and spring back.
🌿 Surface Footprints are drawn on top of the block. Shape, tint and how long they last depend on what you walk on.
🔷 Classic Simple flat markers you style yourself: square, circle, paw or cross, in six colors, with an optional glow.

🧭 Trail Behaviour

  • Expire by time and steps (default, combined mode): a footprint disappears once it is older than 1–300 seconds (default 60) or is more than 1–500 footprints back (default 50), whichever comes first. You can also expire by time only or steps only.
  • Natural walking: footprints face the way you walk and alternate left and right feet. Sprinting lengthens your stride.
  • Stealth: no footprints while sneaking (on by default).
  • Hard-surface scuffs: faint dust marks on stone and planks, can be turned off.
  • Follows the world: break the block under a footprint and the footprint goes with it.
  • Render distance: footprints farther than 48 blocks are skipped (adjustable from 8 to 256).

⚙️ Settings

  • Settings screen for every option: open it from Mod Menu on Fabric, or from the Mods list on Forge and NeoForge.
  • Toggle key: press Z to turn the trail on or off (rebindable in Controls).
  • Config file: config/footstepstrail.json. A broken file never crashes the game; it is saved as .broken and defaults are used.
  • Modded blocks: map any block ID to a material (sand, snow, mud, stone, …) in deformationMaterials so it takes footprints correctly.

⌨️ Commands

All commands are client-side. Type /footsteps help in-game for the full list. Tab completion only suggests what fits your current type (for example, appearance only shows up for Classic).

Command Description
/footsteps Show current status
/footsteps toggle Turn the trail on or off
/footsteps clear Remove all current footprints
/footsteps type <terrain|surface|classic> Choose the footprint type
/footsteps mode <combined|time|steps> combined (default): a footprint expires at whichever limit comes first, time or steps. time: time limit only. steps: step limit only
/footsteps size <0.05–2.0> Set the footprint size
/footsteps config time set <1–300> Seconds footprints last (combined and time modes)
/footsteps config steps set <1–500> Footprints to keep (combined and steps modes)
/footsteps config rotation <true|false> Face your walking direction
/footsteps config alternating <true|false> Alternate left and right feet
/footsteps config stealth <true|false> No footprints while sneaking
/footsteps config scuffs <true|false> Scuff marks on hard surfaces
/footsteps appearance shape <square|circle|paw|cross> Marker shape (classic only)
/footsteps appearance color <color> Marker color (classic only)
/footsteps appearance glow [true|false] Toggle the glow (classic only)

📦 Versions & Requirements

Loader Minecraft Needs
Fabric 1.20.1 · 1.21.1 · 26.3 Fabric API · Mod Menu (optional, for the settings screen)
Forge 1.12.2 · 1.20.1 —
NeoForge 1.21.1 · 26.3 —

🔧 Renderer Compatibility

  • Sodium and Embeddium: Terrain footprints work out of the box.
  • OptiFine, VulkanMod and other renderers that replace chunk building: detected at startup. Terrain footprints can't be drawn there, so Surface becomes the default type. If you pick Terrain anyway, the settings screen and /footsteps tell you why no prints appear.

🎒 For Modpack Authors

  • Free to include in any modpack, public or private. No need to ask; a link back to this page is appreciated.
  • Client-side only: safe to ship in a pack that also runs on a dedicated server. It won't crash the server, and players don't need it there.
  • Ship your own defaults: include a config/footstepstrail.json to set the type, lifetime and look for your pack. Use deformationMaterials so your pack's modded blocks take footprints correctly.
  • Works with Sodium and Embeddium, and falls back cleanly on renderers it can't draw terrain prints with.
  • Using it in your pack? Feel free to say so on the issue tracker so I can test new versions against it.

🐞 Bugs & Suggestions

Found a bug, a crash, or a mod it doesn't get along with? Please open an issue on the GitHub issue tracker. Include your Minecraft version, loader, mod list (especially Sodium, Embeddium, Iris, Oculus or OptiFine) and your logs/latest.log. Feature ideas are welcome there too.

You can join my Discord server too for faster response and resolution: https://discord.gg/Wvst4znsgk


Client-side only • Works on any server • MIT License • Made by Blue Print

Project description from CurseForge.

Pick your setup

Footsteps Trail by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

31 available setups

Showing the newest 12 of 17 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Footsteps Trail versions and loaders

5 of 48 releases match
Clear filters

Looking for an older file? The official CurseForge project page is in Resources.