Back to mods
Phoenix's Fission project artwork

CurseForge · Minecraft mod

Phoenix's Fission

A fission addon for GregTech modern, designed around peak configurability.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Phoenix's Fission release should I use?

Updated today
Latest stable file PhoenixFission-0.2.7-slim.jar
Game version 1.20.1
Loader Forge

Phoenix's Fission PhoenixFission-0.2.7-slim.jar targets 1.20.1 with Forge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.

Where it goes

Is Phoenix's Fission required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release Forge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Phoenix's Fission PhoenixFission-0.2.7-slim.jar need?

PhoenixFission-0.2.7-slim.jar. Change the file and its required mods may change too.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add Phoenix's Fission without breaking your instance.

Built for Phoenix's Fission PhoenixFission-0.2.7-slim.jar. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use PhoenixFission-0.2.7-slim.jar. It targets 1.20.1 with Forge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside PhoenixFission-0.2.7-slim.jar. It opens that exact file at the source.

About this project

What does Phoenix's Fission add?

A fission addon for GregTech Modern focused on cool, adaptable features and heavy configurability. It can be used standalone, but it’s primarily designed for pack developers who want to reshape reactor behavior, balance, and progression for their own packs.

There are 3 main reactor multiblocks:

Pressurized Fission Reactor

Uses Fission Coolers, Fission Moderators, and a Driver Fuel Rod to produce EU and waste.

  • Cooling is provided by all installed coolers (total HU/t).

  • Coolant consumption behavior is configurable:

    • Additive: every cooler adds to the coolant draw, or

    • Primary-only: only the “primary” (highest-tier / most dominant) cooler determines coolant use.

High Performance Breeder Reactor

Uses Fission Coolers, Fission Moderators, Blanket Rods (targets), and a Driver Fuel Rod to produce stronger fuels for future breeder cycles, plus some power.

  • Blanket processing supports fluid or item inputs/outputs (GT material IDs or Forge registry IDs).

  • Blanket usage behavior can be made configurable as well (additive blankets vs primary-only), matching the coolant model style.

Molten Salt Reactor

Uses MSR Liners and Fission Coolers to process molten salts.

  • Designed to process heavier fissile materials and slowly process them into safer more useful products.

  • Will accumulate Xenon Poisoning over time that you will need to extract from fluid hatches.

  • Has a different heat model focused around flow, not heat.

Custom UIs.

All 4 base machine classes have a custom UI for your viewing pleasure!

Base fission reactor and breeder reactor ui.

image

There are even graphs to see your safety at a glance!

image

image

And a math page!

image

image

Molten Salt Reactor UI.

image

Heat exchanger UI.

image


KubeJS Content Support

New Coolers, Moderators, Fuel Rods, and Blanket Rods can all be defined in KubeJS.

Key points:

  • Coolers now use pure Forge fluid registry IDs for coolant (example: gtceu:distilled_water).

  • Coolers may optionally define an output “hot” coolant (example: distilled water → steam).

    • If the reactor can’t output the hot variant, it can optionally void the output (pack-configurable behavior), so the reactor can still run without requiring an output hatch in every build.
  • Usage behavior (coolant / fuel / blanket) can be driven by config toggles (additive vs primary-only).

Below is an example of each type.

StartupEvents.registry("block", event => {

// 1. CUSTOM FISSION COOLER
event.create('aether_flow_cooler', 'phoenix_fission:fission_cooler')
.displayName('Aether-Flow Cooler')
.tier(3) // Determines explosion scaling and tier-matching logic
.coolerTemperature(1025) // Active heat dissipation capacity (HU/t)
.coolantUsagePerTick(10) // Millibuckets of coolant fluid consumed per operation tick
.requiredCoolantMaterialId('phoenixcore:frost') // Input fluid registry ID
.outputCoolantFluidId('phoenixcore:warm_frost') // Output heated fluid registry ID
.tintColor(0xFF7DE7FF) // Does nothing but nessecary, leave default
.texture('kubejs:block/fission/aether_flow_cooler') // Note: Requires a matching block and active block texture (active is appended to the end)

.maskTexture('phoenix_fission:block/fission/cooler_mask'); // Optional mask texture layer

// 2. CUSTOM FISSION FUEL ROD
event.create('high_density_driver_rod', 'phoenix_fission:fission_fuel_rod')
.displayName('High-Density Driver Rod')
.tier(3) // Controls internal multi-block priority and explosion tiers
.baseHeatProduction(50) // Core HU/t heat produced before moderator modifiers
.durationTicks(1200) // Lifetime in ticks before burning another cycle of fuel
.amountPerCycle(1) // Quantity of fuel items consumed per cycle completion
.neutronBias(1) // Interacts with nearby Breeder/Blanket rod output instability weights
.fuelKey('gtceu:uranium_235_nugget') // Input item ID (Supports tags or specific registry IDs)
.outputKey('gtceu:depleted_uranium_235_nugget') // Output waste item ID
.texture('kubejs:block/fission/high_density_driver_rod'); // Note: Requires a matching block and active block texture (active is appended to the end)

// 3. CUSTOM FISSION MODERATOR

event.create('niobium_modified_silicon_carbide_moderator', 'phoenix_fission:fission_moderator')
.displayName('Nb-SiC Moderator')
.tier(4) // Primary moderator selection hierarchy weight
.euBoost(15) // Scaling factor for increasing EU generation output
.fuelDiscount(5) // Efficiency discount: Extends fuel rod duration ticks between cycles
.texture('kubejs:block/fission/niobium_sic_moderator');

// 4. CUSTOM BREEDER / BLANKET ROD
event.create('uranium_blanket_rod', 'phoenix_fission:fission_blanket_rod')
.displayName('U-238 Blanket Rod')
.tier(2) // Priority logic tier matching
.durationTicks(2400) // Total tick lifetime per transformation cycle
.amountPerCycle(1) // Item consumption rate per cycle completion
.inputKey('gtceu:uranium_238_nugget') // Target breedable material registry entry
// Dynamic Outputs: .addOutput(RegistryKey, Weight, Instability)
.addOutput('gtceu:plutonium_nugget', 70, 1)
.addOutput('gtceu:plutonium_241_nugget', 20, 3)
.addOutput('gtceu:plutonium_238_nugget', 10, 4) // High instability means higher output if neutronBias matches
.texture('kubejs:block/fission/uranium_blanket_rod');

// 5. CUSTOM MOLTEN SALT REACTOR (MSR) LINER
event.create('advanced_msr_liner', 'phoenix_fission:msr_core_liner')
.displayName('Advanced MSR Core Liner')
.tier(3)
.fluidFlowRate(40) // Max mB/t fluid flow processing rate through the liner
.heatPerMb(15.5) // Thermal energy generation constant per millibucket processed
.inputFluidId('gtceu:enriched_naquadah_salt') // Molten salt fuel blend input
.outputFluidId('gtceu:depleted_naquadah_salt')
.texture('phoenix_fission:block/fission/liner_base'); // Also needs an active texture
});

Project description from CurseForge.

Pick your setup

Phoenix's Fission by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

2 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Phoenix's Fission versions and loaders

14 of 14 releases match

Looking for an older file? The official CurseForge project page is in Resources.