Back to mods
Beacon Flight 2 project artwork

CurseForge · Minecraft mod

Beacon Flight 2

Beacons can now allow players to fly!

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Beacon Flight 2 release should I use?

Updated 6 months ago
Latest stable file BeaconFlight-1.3.8+mc26.1.jar
Game version 26.1, 26.1.1, 26.1.2
Loader Fabric

Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar targets 26.1, 26.1.1, 26.1.2 with Fabric. The project page does not say whether this file belongs on the client, dedicated server, or both. 1 required mod needs a matching file.

Where it goes

Is Beacon Flight 2 required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release Fabric
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar need?

BeaconFlight-1.3.8+mc26.1.jar. Change the file and its required mods may change too.

1 required mod needs a matching file

Install Fabric API, Fabric API first, but 1 required mod has no matching file for this setup. Do not mix loader builds to force a match. 3 come through another mod in the chain.

6 listed on this file 3 pulled in by those mods
Fabric API Needed by Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar
required
Matching file found Matched file: [26.1.2] Fabric API 0.155.3+26.1.2
Mod Menu Optional for Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar
optional
Matching file found Matched file: v18.0.2 for 26.1
Mod Menu Optional for Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar
optional
Matching file found Matched file: 18.0.2
Fabric API Needed by Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar
required
No matching file
Cloth Config API Optional for Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar
optional
Matching file found Matched file: 26.1.154+fabric
Text Placeholder API Needed by Mod Menu
pulled in
Matching file found Matched file: placeholder-api-3.0.0+26.1.jar
Fabric API Needed by Mod Menu
pulled in
Matching file found Matched file: 0.155.3+26.1.2

3 extra mods were pulled in by other dependencies. Indented rows show who needs each one. We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add Beacon Flight 2 without breaking your instance.

Built for Beacon Flight 2 BeaconFlight-1.3.8+mc26.1.jar. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use BeaconFlight-1.3.8+mc26.1.jar. It targets 26.1, 26.1.1, 26.1.2 with Fabric; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    Install Fabric API, Fabric API first, but 1 required mod has no matching file for this setup. Do not mix loader builds to force a match. 3 come through another mod in the chain.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside BeaconFlight-1.3.8+mc26.1.jar. It opens that exact file at the source.

About this project

What does Beacon Flight 2 add?

BeaconFlight

BeaconFlight lets active beacons grant creative-style flight when configurable conditions are met.

The gameplay logic is server-side, so it works on dedicated servers with unmodded clients. The same jar can also be used in singleplayer. If you install Mod Menu and Cloth Config on the client, the mod exposes an in-game config screen as well.

Compatibility

  • Minecraft 1.21 through 1.21.11
  • Fabric Loader 0.15.11+
  • Java 21+
  • Fabric API required
  • Mod Menu optional
  • Cloth Config optional

How It Works

  • The beacon must be active and have a primary effect selected.
  • By default, BeaconFlight requires a level 4 beacon and the minecraft:end/elytra advancement.
  • While the player stays in range and meets all configured requirements, flight is allowed.
  • When the player leaves range, flight can linger for a configurable amount of time.
  • When flight is removed while the player is airborne, Slow Falling can be applied automatically.

Installation

  1. Install Fabric Loader and Fabric API for your target Minecraft version.
  2. Place the BeaconFlight jar in the mods folder.
  3. On a dedicated server, only the server needs the mod for flight to work.
  4. In singleplayer, install the jar normally on the client.
  5. Start the game or server once to generate the config file.

The config file is created at:

config/beaconflight_config.json

Configuration

You can edit the JSON file directly, or use the Mod Menu config screen if Mod Menu and Cloth Config are installed.

Available options:

  • minBeaconLevel: minimum beacon pyramid level required. Valid values are 1 to 4.
  • mainHandItem: required item in the player's main hand, or null.
  • offHandItem: required item in the player's off hand, or null.
  • anyHandItem: required item in either hand, or null.
  • headItem: required helmet item, or null.
  • chestItem: required chest item, or null.
  • legsItem: required leggings item, or null.
  • feetItem: required boots item, or null.
  • advancementsRequired: list of advancement ids the player must have completed.
  • xpDrainRate: XP drained per second of active flight. Use 0.0 to disable XP drain.
  • flightLingerTime: custom linger duration in ticks after the player leaves beacon range. Use 0 to reuse the normal beacon effect duration.
  • slowFallingTime: Slow Falling duration in seconds after flight is lost.
  • logLevel: BeaconFlight log level. Useful values are INFO, DEBUG, TRACE, ALL, and OFF.

Notes:

  • Item fields must use item ids such as minecraft:diamond_chestplate.
  • Advancement fields must use advancement ids such as minecraft:end/elytra.
  • Resetting the config returns the default requirements, which are not a minimal test setup.

Default config:

{
  "minBeaconLevel": 4,
  "mainHandItem": null,
  "offHandItem": null,
  "anyHandItem": null,
  "headItem": null,
  "chestItem": null,
  "legsItem": null,
  "feetItem": null,
  "advancementsRequired": [
    "minecraft:end/elytra"
  ],
  "xpDrainRate": 0.0,
  "flightLingerTime": 0,
  "slowFallingTime": 10,
  "logLevel": "INFO"
}

Minimal config for testing:

{
  "minBeaconLevel": 1,
  "mainHandItem": null,
  "offHandItem": null,
  "anyHandItem": null,
  "headItem": null,
  "chestItem": null,
  "legsItem": null,
  "feetItem": null,
  "advancementsRequired": [],
  "xpDrainRate": 0.0,
  "flightLingerTime": 0,
  "slowFallingTime": 10,
  "logLevel": "ALL"
}

Troubleshooting

  • If flight does not activate, make sure the beacon is actually active and has a primary effect selected.
  • If you used "reset" in the config UI, remember that the defaults still require a level 4 beacon and the Elytra advancement.
  • Set logLevel to ALL to get grant and deny messages in the game log.
  • If you want a clean test, remove all item requirements, clear advancementsRequired, and set minBeaconLevel to match your beacon.

Building From Source

Use the Gradle wrapper:

.\gradlew.bat build

The built jar is written to:

build/libs/

Credits

Project description from CurseForge.

Pick your setup

Beacon Flight 2 by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

15 available setups

Showing the newest 12 of 15 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Beacon Flight 2 versions and loaders

2 of 2 releases match

Looking for an older file? The official CurseForge project page is in Resources.