CurseForge · Minecraft mod
SLM: Elements
Add an advanced elemental and elemental damage system, with direct, inverse, and static interactions and more!
Quick answer
Which SLM: Elements release should I use?
SLM: Elements SLM-Elements-1.1.3-1.20.1+[Forge].jar targets 1.20.1 with Forge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.
Where it goes
Is SLM: Elements required on the client, server, or both?
The project page does not say whether this file belongs on the client, dedicated server, or both.
The source does not explicitly classify this release as client-only or server-only.
What else does SLM: Elements SLM-Elements-1.1.3-1.20.1+[Forge].jar need?
SLM-Elements-1.1.3-1.20.1+[Forge].jar. Change the file and its required mods may change too.
This file does not list any required mods. Do not add a library just because a different file uses it.
This file does not list any required or optional mods.
Before you install it
Add SLM: Elements without breaking your instance.
Built for SLM: Elements SLM-Elements-1.1.3-1.20.1+[Forge].jar. Pick another file and the loader, install side or required mods may change.
- 01
Stick to this file
Use SLM-Elements-1.1.3-1.20.1+[Forge].jar. It targets 1.20.1 with Forge; another release may have different loader, side or dependency requirements.
- 02
Bring the mods it needs
This file does not list any required mods. Do not add a library just because a different file uses it.
- 03
Put it on the correct side
The project page does not say whether this file belongs on the client, dedicated server, or both.
- 04
Pick the file you checked
Use the “Get this file” button beside SLM-Elements-1.1.3-1.20.1+[Forge].jar. It opens that exact file at the source.
About this project
What does SLM: Elements add?
⚔️ SLM: Elements
SLM: Elements introduces a deep elemental system built around interactions, reactions, and combat strategy.
Infuse your weapons with elements like Ignis, Aqua, Terra, Frost, Volt, Aero, Lumen, and Umbra to trigger reactions.
The combat system is governed by the following logic: Elemental Damage → ICD → Element→ Reaction → ERCS → ERGCS
🔥Core Features
8 Elements
- Ignis, Aqua, Terra, Frost, Volt, Aero, Lumen & Umbra
Elemental Reactions System
- Combine elements to trigger AoE, DoT, Burst, and Utility effects.
- Some reactions can be direct or inverse depending on the order in which they are applied
- The type of elemental damage can vary depending on the order in which the elements are applied for some reactions.
Dynamic Damage Scaling: damage adapts based on:
- Armor
- Max Health
- Combat conditions
Advanced Combat Mechanics
- Internal Cooldown (ICD)
- Per-reaction cooldowns (ERCS)
- Global reaction limiter (ERGCS)
Environmental Element System: gain elements from:
- Weather
- Biomes
- Surroundings
Text-based particle feedback
- Each element or reaction is indicated in text form in the entity that experiences it; the color is different if it is inverse, direct, or static.
🌍 Environmental Elements
(Optional via config)
Gain elements from:
- Water, rain → Aqua
- Lava, fire → Ignis
- Underground / desert → Terra
- Snow / cold → Frost
- Lightning → Volt
⚔️ Damage Types
Direct Damage
- Causes knockback
- Scales heavily with weapon damage
- Used in infusions and burst reactions
Tick Damage (DoT)
- Ignores 100% armor
- No knockback
- Scales with diminishing returns
- Behaves like “true damage”
🧪 Elemental Damage
Each element interacts differently:
- Ignis → Strong vs low armor
- Aqua → Strong vs low max HP
- Terra → Strong vs grounded targets
- Frost → Scales with high max HP
- Volt → Strong vs high armor
- Aero → Strong vs air targets
- Umbra → Strong vs low HP
- Lumen → Strong vs high HP
🔽 More Details (Advanced)
⚙️ Advanced Details – Elements & Damage Behavior
🌿 Element Identity & Effects
Each element not only defines damage type, but also introduces unique status effects and gameplay interactions.
🔥 Ignis
- Applies Ignis Tick (burning damage over time)
- Deals 1 damage per tick
- More effective against low armor targets
❗ Will not apply if the target is already burning
💧 Aqua
- Currently has no direct status effect
- Acts as a reaction enabler and scaling modifier
🌍 Terra
- No direct status effect
- Strongly tied to positional combat (grounded targets)
❄️ Frost
- ❄️ Reduces movement speed
- 🍖 Slows natural regeneration (increases hunger consumption)
⚡ Volt
- ⚡ Reduces total experience gained by the player
🌪️ Aero
- 🌬️ No direct debuff
- Focused on area propagation and aerial interaction
- Core element for AoE reaction spreading
✨ Lumen
- 💡 No direct debuff
- Represents purity and amplification
- Strong synergy with high-health targets and utility reactions
🌑 Umbra
- 🌘 No direct base debuff
- Focused on execution, corruption, and scaling with missing health
- Enables high-risk / high-reward mechanics
⚔️ Elemental Damage Behavior
Each element modifies how damage is calculated depending on the target’s state.
🔥 Ignis (Anti-Armor – Inverse Scaling)
- ✔️ Up to +25% damage vs low armor (0–20 Armor)
- ❌ -10% damage vs high armor (20+ Armor)
💧 Aqua (Anti-Low HP Targets)
- ✔️ Up to +20% damage vs low Max HP targets (0–60 HP)
- ❌ -10% damage vs very high Max HP targets
❄️ Frost (Anti-High HP – Boss Killer)
- ✔️ Up to +25% damage vs high Max HP targets
- ❌ -10% damage vs low Max HP targets
⚡ Volt (Armor Scaling)
- ✔️ Up to +25% damage vs high armor targets
- ❌ -10% damage vs low/no armor targets
🌍 Terra (Ground Control)
- ✔️ +15% damage if target is grounded
- ❌ -10% damage if target is airborne
🌪️ Aero (Air Control)
- ✔️ +15% damage if target is airborne
- ❌ -10% damage if target is grounded
✨ Lumen (Health-Based – Frontloaded)
- ✔️ Up to +20% damage at full health
- ❌ Scales down to -10% as target loses HP
🌑 Umbra (Execution Scaling)
- ✔️ Up to +25% damage as target HP approaches zero
- ❌ -10% damage vs full health targets
🧠 Design Philosophy
- Elements are not just damage types, they define combat roles:
- Ignis / Volt → Armor interaction
- Frost / Aqua → HP scaling extremes
- Terra / Aero → Position-based gameplay
- Lumen / Umbra → Opposing health-state mechanics
🔄 ICD (Internal Cooldown)
Limits how often elements are applied
- ~2.5s or 3–4 hits for basic attacks
- Skills bypass this restriction
🔽 More Details (Advanced)
🌐 ICD – Internal Cooldown Dealer:
The Internal Cooldown Dealer (ICD) introduces a cooldown mechanism between successive elemental infusions or transfers. It ensures that elemental application does not occur too frequently from regular attacks, maintaining balance between basic attacks and special abilities.
When a weapon is infused with an element (e.g. Ignis), it can only apply or transfer that element to a target once every 2.5 seconds, or after 3–4 consecutive hits. This restriction applies to normal attacks only.
Special abilities bypass this limitation and always apply their element.
The ICD behavior is dynamic and depends on:
- The source entity’s characteristics.
- The weapon’s properties.
- Whether the interaction is through basic attack or skill.
Elemental Transfer:
When an element is transferred via ICD, additional data is passed from the Source Entity to the Target Entity. This includes metadata to determine reaction damage scaling, which depends on the source’s weapon stats and base damage.
Reaction damage is categorized into two main types (not detailed here).
Elemental Durations (in Ticks):
| Element | Duration |
|---|---|
| Ignis | 120 ticks (~6s) |
| Aqua | 105 ticks (~5.25s) |
| Terra | 140 ticks (~7s) |
| Volt | 80 ticks (~4s) |
| Frost | 105 ticks (~5.25s) |
| Aero | 70 ticks (~3.5s) |
| Lumen | 60 ticks (~3s) |
| Umbra | 60 ticks (~3s) |
🔁 Reaction System
Reactions are categorized into:
- Direct → Chainable reactions
- Reverse → Higher damage, consumes elements
- Static → Same behavior regardless of order
🔽 More Details (Advanced)
⚛️Elemental Reactions
Elemental Reactions occur when two elements interact on the same target, producing unique effects that range from burst damage to utility and battlefield control.
Reactions are divided into four main categories:
⚡ Instant Reactions
These reactions are resolved in a single tick, delivering immediate impact.
🔥 Undetermined Reactions (Source-Based)
These reactions scale primarily with the attacker’s weapon, not the target.
💥 Overload (Ignis + Volt)
- Deals 125% weapon damage
- Triggers an AoE explosion (75%)
- Applies knockback
- ⚠️ PvP: Only direct damage is applied
💧 Vaporized (Ignis + Aqua)
- Deals 145% weapon damage
- 🔁 Reverse (Aqua → Ignis): 170% damage
❄️ Melt (Ignis + Frost)
- Deals 165% weapon damage
- 🔁 Reverse: 170% damage
- 🔥 Double Ignis setups may reach 200% damage
💥 Flare (Lumen + Ignis)
- Deals 55% damage
- Applies blindness
💧 Purify (Lumen + Aqua)
- Removes negative effects
- Deals bonus damage per removed effect:
- +10% / +15% / +20% / +25% (max 4 stacks)
📌 Rule:
The last applied element defines the final damage type.
❄️ Determined Reactions (Target-Based)
🧊 Frozen (Aqua + Frost)
- Deals 14% of target's Max HP
- Scales with weapon damage (with diminishing returns)
- Strong vs high HP targets
Scaling behavior:
- 40 damage → no penalty
- 20 damage → -35%
- 0 damage → -70%
Caps:
- Base: 175 damage
- With Frost scaling: 262.5 max
☣️ On-Tick Reactions (DoT)
Applies damage over time instead of instant burst.
⚡ Electrocharged (Aqua + Volt)
🌍 Cold (Terra + Frost)
🔥 Burning (Terra + Ignis)
Characteristics:
- Ignores 100% armor
- No knockback
- Scales with weapon damage (flattening over time)
- Behaves like poison-type damage
🔁 Reverse Scaling Bonus
- Cold (Terra base) → +15% total damage
- Burning (Terra base) → +18% total damage
🌍 Decay (Umbra + Terra)
- Deals Terra-based damage over time
⚡ Corruption (Umbra + Volt)
- Applies scaling DoT
- Damage increases as HP decreases
💀 Execution Rule:
- If target reaches ≤ 5% HP → instant execution
🧠 Utility Reactions
These reactions do not deal direct damage, but modify combat behavior.
⚡ Conductor (Terra + Volt)
- +30% Volt damage taken
- 10% chance every 3s to trigger lightning strike
❄️ Superconductor (Frost + Volt)
- Reduces all resistances by 20%
- Fallback: +10% damage taken
🌍 Rooted (Aqua + Terra)
- +25% Terra damage taken
- -15% movement speed
🛡️ Crystallize (Lumen + Terra)
- Removes 4 5% absorption hearts
- Else:
- -10% resistance
- or +5% damage taken (fallback)
❄️ Hyperconductor (Lumen + Frost)
- +12% Frost damage from all sources
⚡ Lumishock (Lumen + Volt)
- +17% Lumen damage from all sources
🔥 Shrivelled (Umbra + Ignis)
- +10% Ignis damage taken
💧 Drowning (Umbra + Aqua)
- +15% Aqua damage taken
❄️ Shadowfrost (Umbra + Frost)
- +13.5% Umbra damage from all sources
🌪️ AoE Propagation
All Aero reactions are Static and focus on element spreading.
- Deal 25% Damage
- Consume elements
- Apply AoE propagation
| Reaction | Effect |
|---|---|
| Firestorm (Ignis + Aero) | Spreads Ignis |
| Whirlpool (Aqua + Aero) | Spreads Aqua |
| Duststorm (Terra + Aero) | Spreads Terra |
| Blizzard (Frost + Aero) | Spreads Frost |
| Stormcall (Volt + Aero) | Spreads Volt |
| Resplendence (Lumen + Aero) | Spreads Lumen |
| Obscurity (Umbra + Aero) | Spreads Umbra |
🌗 Eclipse (Lumen + Umbra)
- Emits a symmetrical AoE burst
- Applies both light and dark energy
🧠 Reaction Rules Summary
- Direct → Chainable, lower burst
- Reverse → Higher damage, consumes elements
- Static → Same behavior regardless of order
The environment can also trigger reactions, these have lower damage; in turn, if the environment executes a reaction on the player, the damage of this will increase based on the difficulty of the world.
⏱️ ERCS (Reaction Cooldowns)
Each reaction has its own cooldown:
- Prevents spam
- Not shared between reactions
🔽 More Details (Advanced)
🌐 ERCS – Reaction Shield
The Entity Reaction Cooldown System (ERCS) prevents elemental reactions from being triggered too frequently on the same entity.
Each reaction has its own independent cooldown, meaning:
- Reactions do not share cooldowns
- Direct and reverse combinations are treated separately (when applicable)
- Static reactions behave identically regardless of order
This system ensures combat remains balanced, readable, and non-exploitable.
⚙️ Cooldown Rules
- Cooldowns are measured in milliseconds (ms)
- Applied per entity, per reaction
- If a reaction is not registered → defaults to 100 ms
- Works alongside ICD and ERGCS
🔥 Base Reactions
| Reaction | Direct (ms) | Reverse (ms) | Static (ms) |
|---|---|---|---|
| Melt | 850 | 925 | – |
| Overload | – | – | 420 |
| Vaporized | 580 | 605 | – |
| Frozen | – | – | 1200 |
| Electrocharged | – | – | 300 |
| Cold | 315 | 380 | – |
| Burning | 315 | 335 | – |
| Conductor | – | – | 335 |
| Superconductor | – | – | 530 |
| Rooted | – | – | 335 |
🌪️ Aero Reactions (Propagation)
All Aero-based reactions are Static
| Reaction | Cooldown (ms) |
|---|---|
| Firestorm | 450 |
| Whirlpool | 450 |
| Duststorm | 450 |
| Blizzard | 450 |
| Stormcall | 450 |
| Resplendence | 450 |
| Obscurity | 450 |
✨ Lumen Reactions
| Reaction | Cooldown (ms) |
|---|---|
| Flare | 400 |
| Purify | 500 |
| Crystallize | 600 |
| Hyperconductor | 550 |
| Lumishock | 550 |
| Eclipse | 650 |
🌑 Umbra Reactions (Corruption)
| Reaction | Cooldown (ms) |
|---|---|
| Shrivelled | 500 |
| Drowning | 550 |
| Decay | 450 |
| Shadowfrost | 550 |
| Corruption | 670 |
📌 Notes
- Frozen (1200 ms) has the highest cooldown due to its scaling with max HP
- Corruption (670 ms) is limited due to its scaling DoT + execution potential
- Crystallize (600 ms) prevents defensive stacking abuse
- Aero reactions (450 ms) are balanced for propagation without spam
🛡️ ERGCS (Global Reaction Shield)
Builds up with strong reactions
- Blocks further reactions temporarily
- Decays over time and on hit
🔽 More Details (Advanced)
🌐 ERGCS – Global Reaction Shield
The Entity Reaction Global Cooldown System (ERGCS) introduces a global protection layer that prevents entities from being overwhelmed by continuous elemental reactions.
Each reaction adds intensity to a global meter.
When the meter reaches a threshold, the entity becomes temporarily immune to all reactions.
- ⚠️ Prevents reaction spam
- ⚖️ Balances high-damage combos
- 🧠 Especially relevant for bosses or high-HP entities
🔍 More Details
The system works through a cumulative intensity counter:
- Each reaction adds a predefined intensity value
- When the total reaches 205, reactions are blocked
- While blocked:
- ❌ No reactions can be triggered
- ✅ Normal damage still applies
⏳ Decay Behavior
The global shield is not permanent:
- 🔻 -1 intensity per hit received
- 🔻 -1 intensity every 2 ticks (passive decay)
Once the value drops below the threshold, reactions can occur again.
⚖️ Reaction Intensity Table
| Reaction | Direct | Reverse | Static |
|---|---|---|---|
| Melt | 13 | 17 | – |
| Overload | – | – | 8 |
| Vaporized | 10 | 12 | – |
| Frozen | – | – | 25 |
| Electrocharged | – | – | 3 |
| Cold | 4 | 6 | – |
| Burning | 4 | 5 | – |
| Conductor | – | – | 6 |
| Superconductor | – | – | 10 |
| Rooted | – | – | 6 |
🌪️ Aero Reactions (AoE Propagation)
| Reaction | Intensity |
|---|---|
| Firestorm | 9 |
| Whirlpool | 9 |
| Duststorm | 9 |
| Blizzard | 9 |
| Stormcall | 9 |
| Resplendence | 9 |
| Obscurity | 9 |
✨ Lumen Reactions
| Reaction | Intensity |
|---|---|
| Flare | 7 |
| Purify | 11 |
| Crystallize | 15 |
| Hyperconductor | 13 |
| Lumishock | 13 |
| Eclipse | 16 |
🌑 Umbra Reactions
| Reaction | Intensity |
|---|---|
| Shrivelled | 11 |
| Drowning | 13 |
| Decay | 9 |
| Shadowfrost | 13 |
| Corruption | 17 |
🧠 Intensity Rules
- Direct → Lower intensity, allows chaining
- Reverse → Higher intensity, more burst-oriented
- Static → Same value regardless of order
✨ Visual Feedback
- Custom text particles
- Display elemental application and reactions
- Integrated with combat feedback
⚙️ Configuration
Located in: .minecraft/config/slm_elements/
Options include:
- Enable/disable elements
- Enable reactions
- Environmental behavior
- Particle settings
⚠️ Notes
All values are subject to balance changes
Project description from CurseForge.
Pick your setup
SLM: Elements by Minecraft version and loader
Choose the version and loader you play, then open the matching release.
1.20.1
1 loader buildCheck the dependencies, then try the file in a copied instance before changing a world you care about.
Recent files
SLM: Elements versions and loaders
SLM-Elements-1.1.3-1.20.1+[Forge].jar
17 Aug 2026
SLM-Elements-1.1.2-1.21.1+[NeoForge].jar
28 Jul 2026
SLM-Elements-1.1.2-1.20.1+[Forge].jar
28 Jul 2026
SLM-Elements-1.1.1-1.20.1+[Forge].jar
26 Jul 2026
SLM-Elements-1.1.1-1.21.1+[NeoForge].jar
24 Jul 2026
SLM-Elements-1.1-1.21.1+[NeoForge].jar
22 Jul 2026
SLM-Elements-1.0.1-1.20.1+[Forge].jar
4 Jul 2026
SLM-Elements-1.0.1-1.21.1+[NeoForge].jar
4 Jul 2026
SLM-Elements-1.0-1.20.1+[Forge].jar
29 Jun 2026
SLM-Elements-1.0-1.21.1+[NeoForge].jar
26 Jun 2026
Looking for an older file? The official CurseForge project page is in Resources.