Back to mods
Create: Lights & Controls project artwork

CurseForge · Minecraft mod

Create: Lights & Controls

More lights and wireless redstone switches that plug straight into Create's Redstone Link network

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Create: Lights & Controls release should I use?

Updated 4 months ago
Latest stable file Create: Lights & Controls 2.2.1 for mc1.21.1
Game version 1.21.1
Loader NeoForge

Create: Lights & Controls 2.2.1 for mc1.21.1 targets 1.21.1 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.

Where it goes

Is Create: Lights & Controls required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release NeoForge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Create: Lights & Controls 2.2.1 for mc1.21.1 need?

Create: Lights & Controls 2.2.1 for mc1.21.1. Change the file and its required mods may change too.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add Create: Lights & Controls without breaking your instance.

Built for Create: Lights & Controls 2.2.1 for mc1.21.1. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use Create: Lights & Controls 2.2.1 for mc1.21.1. It targets 1.21.1 with NeoForge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside Create: Lights & Controls 2.2.1 for mc1.21.1. It opens that exact file at the source.

About this project

What does Create: Lights & Controls add?

create_lac_title

Available for NeoForge Requires Create Buy Me a Coffee


⚙️ Create: Lights & Controls :

A Create add-on that brings a full set of lighting, redstone control, access and sound blocks ; all built to plug straight into Create's Redstone Link network for clean, wireless automation.


💡 Lighting :

create_lac_lighting

  • Crystal Lamps - sleek colored lamps in 14 dye colors.
  • Caged Signal Lights - rugged industrial cage lights in 14 colors.
  • Inlaid Flat Lights - slim panels that sit flush against any surface, in 14 colors.
  • Large Tint Lights - standalone surface-mounted lights in Andesite, Industrial, Copper and Brass casings. The bulb is dyeable to any color, invertible, and links to a frequency.

Every light emits full brightness when active and can be inverted ; so it glows while unpowered and turns off when it receives a signal.


🧩 Modules :

create_lac_modules

The Module Panel (Module Anchor) is a wall-mounted chassis that holds several small modules at once — shift+right-click a module item onto any surface and it snaps onto a panel automatically (creating one if needed).

🔢 326.9 billion possible module combinations per panel

Mix module types, casings, colors and layouts — no two panels have to look alike.

  • Modular Button - dyeable button, wireless frequency, clipboard copy/paste.
  • Modular Lever - wireless frequency, clipboard copy/paste.
  • Modular Item Frame (Classic & Dark) - displays item without consuming it.
  • Modular Tint Light (Andesite / Copper / Brass / Industrial) - compact dyeable module version of the Large Tint Light, invertible, frequency-linked.

🕹️ Controls :

create_lac_controls
  • Industrial Gear Switch - a hand-built gear lever that mounts on floor, wall or ceiling. Right-click to throw it; it emits a redstone signal and broadcasts its on/off state over a frequency.
  • Quad Lever Panel - four independent levers on one block, each transmitting on its own frequency. The bulbs are dyeable per lever, and the panel emits stronger world light as more levers switch on.
  • Inverted Redstone Link - a Redstone Link with flipped logic: it transmits while unpowered, and its receiver fires only when the frequency goes silent.
  • Emergency Button - works exactly like a vanilla button, and can also carry a wireless frequency, invert and toggle mode.
  • Elevator Push Button - same as the Emergency Button, plus it can link directly to an Elevator Contact for one-button remote calling, any distance.
  • Broadcast Node - rebroadcasts a Redstone Link signal wirelessly into up to 3 target blocks, simulating a real redstone source on each one. Wrench it to enter link mode, then aim and wrench each target to connect it.

🪧 Signage :

  • Board - a wall-mounted text sign with an in-game GUI editor (up to 3 lines). Dye the text and the background panel separately with a Dye, and make the text glow with a Glow Ink Sac, just like vanilla signs.
  • Lit Board - everything Board does, plus a dyeable bulb and a Redstone Link frequency, so it lights up on signal. Invertible, same as the mod's other lamps.

🔑 Access :

  • Access Card / Blank Card - craftable keycard, blank until encoded.
  • Card Inscriber - encodes a blank card with a 4-digit PIN and a dye color; ejects the finished card with a spray animation.
  • Card Reader - sticks to any surface; first swipe registers a card's PIN as its accepted key, later swipes compare the code and pulse a redstone signal on match (green/red bulb), and can also broadcast over a Redstone Link frequency.
  • Keycard Door - Opens with a Linked Access Card

🔊 Sound

  • Smart Speaker - plays any sound in the game (vanilla or modded). Trigger it with a redstone signal or a Redstone Link frequency, and dial in the broadcast range (1–32 blocks) with a natural distance falloff. Its custom menu lets you search every loaded sound, preview them, set the range and assign a frequency.

📡 How it works / Redstone Link integration

Controls (Gear Switch, Quad Lever Panel, Emergency/Elevator Push Button, Modules, Broadcast Node) act as transmitters; lamps, lights, the Lit Board, the Card Reader and the Smart Speaker act as receivers. Give a transmitter and a receiver the same frequency and the receiver responds wirelessly — no dust, no repeaters.

Set a frequency by Sneak + Right-Click on any of the mod's linkable blocks to open the frequency menu, then drop two items into the frequency slots (exactly like a vanilla Create Redstone Link). You can also toggle Inverted Mode right there.

📋 Tip / use the Clipboard!
Create's Clipboard can save your frequencies so you can copy & paste them across all of the mod's Redstone-Link blocks - lamps, lights, levers, modules and speakers alike. Write down a frequency combo once, then reuse it everywhere to keep large builds perfectly in sync.


🛠️ Crafting

Most blocks are crafted at a Crafting Table. Colored lights use a new Luminous Component (Raw Luminous Component mixed from glowstone dust + polished rose quartz, then pressed) instead of raw glowstone ; all recipes are viewable in JEI / EMI / REI.


📦 Requirements

  • Minecraft 1.21.1
  • NeoForge
  • Create (required) - plus its own dependencies (Flywheel, Ponder, Registrate), which ship bundled with Create.

❤️ Credits

Huge thanks to the Create team - this add-on stands on their incredible work and Redstone Link API. Go support the original mod!

If you enjoy this mod, you can buy me a coffee ☕ thank you!


Created by Moubarack · Released under the ALL RIGHTS RESERVED.
You are allowed to include this mod in Modrinth or CurseForge modpacks without asking for permission.
Redistribution of the jar files is not allowed (do not share the jar files anywhere else).

Project description from CurseForge.

Pick your setup

Create: Lights & Controls by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

3 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Create: Lights & Controls versions and loaders

10 of 10 releases match

Looking for an older file? The official CurseForge project page is in Resources.