LunaLace's Movement Overhaul

LunaLace's Movement Overhaul

Overview
LunaLace's Movement Overhaul is a Minecraft movement mod that adds double jump, crawling, sliding, diving, omnidirectional movement, wall running, wall jumping, climbing, long jumps, and a grappling hook for fluid parkour and traversal.

Features

Double Jump — double-tap Space.
Crawl — default X.
Slide — default C.
Dive — dive in the current/desired direction.
Omnidirectional Movement — run, slide, and dive in up/down/left/right directions.
Wall Run — run along walls.
Wall Jump — jump off walls.
Grappling Hook — default Mouse5; fire in the desired direction and move along the hook. The grappling hook can pull entities toward the player, stopping them three blocks away, and can also launch entities within three blocks of the player three blocks away.
Climbing — face a block and press W + Space while on the ground or in the air to climb up three blocks. The climbing height can be configured.
Vaulting — automatically vaults over one-block-high obstacles (including fences) while running.
Long Jump — while using omnidirectional movement, perform a long-distance jump in the corresponding direction by briefly pressing Shift while running.
Config Menu — press O to freely configure all related features and actions.

Controls

Crawl: X
Slide: C
Grappling Hook: Mouse5
Double Jump: double-tap Space
Run in a direction: double-tap a direction key, or Ctrl + the corresponding direction key
Slide while running: press the slide key to slide in that direction
Dive while running: press the dive key to dive in that direction
Grapple: press the grappling hook key to fire in that direction and move along the hook
Climb: face a block and press W + Space to climb
Long Jump: briefly press Shift while running with omnidirectional movement
Config Menu: O

Configuration
Press O to freely configure related features and keybinds, including climbing height and other movement settings.

All actions can be adjusted in the O config menu.

Note: The Fabric version is no longer supported.

LunaLace 的移动大修

简介
LunaLace 的移动大修是一个 Minecraft 移动模组，加入二段跳、趴下、滑铲、飞扑、全向移动、墙跑、蹬墙跳、攀爬、飞跃和钩爪，带来流畅的跑酷与立体穿梭体验。

功能

二段跳 — 双击空格。
趴下 — 默认 X 键。
滑铲 — 默认 C 键。
飞扑 — 向当前/对应方向飞扑。
全向移动 — 支持上/下/左/右方向的奔跑、滑铲和飞扑。
墙跑 — 可在墙面上奔跑。
蹬墙跳 — 可从墙面蹬出跳跃。
钩爪 — 默认 Mouse5 键；向对应方向发射并顺着钩爪移动过去。钩爪可以将实体拉取至玩家三格远的位置，也可以将三格范围内的实体弹射至三格远的位置。
攀爬 — 可在地面或空中面对方块时使用 W + 空格攀爬至三格高度，上墙高度可配置。
翻越 — 奔跑时会自动翻越一格高的障碍物（包括栅栏）。
飞跃 — 在全向移动状态下，奔跑时短按 Shift，可向对应方向进行远距离跳跃。
配置菜单 — 按 O 键自由配置所有相关功能与操作。

操作

趴下：X
滑铲：C
钩爪：Mouse5
二段跳：双击空格
朝某方向奔跑：双击方向键，或 Ctrl + 对应方向键
奔跑中滑铲：按滑铲键，向对应方向滑铲
奔跑中飞扑：按飞扑键，向对应方向飞扑
发射钩爪：按钩爪键，向对应方向发射钩爪并顺着钩爪移动过去
钩爪拉取实体：将实体拉至玩家三格远的位置
钩爪弹射实体：将三格范围内的实体弹射至三格远的位置
攀爬：面对方块时按 W + 空格，可向上攀爬三格
飞跃：全向移动奔跑时短按 Shift，向对应方向进行远距离跳跃
配置菜单：O

配置
按 O 键可自由配置相关功能与按键，包括攀爬高度和其他移动设置。

所有操作均可在 O 键配置菜单中调整。

注意： Fabric 版本不再支持。