CurseForge · Minecraft mod
Blast Valve 12
Kiloton bunker add-on with yield-proof blast blocks, 5-second radar warnings, sliding blast doors and a retractable equipment platform.
Quick answer
Which Blast Valve 12 release should I use?
Blast Valve 12 v1.2.2 – NeoForge 1.21.1 targets 1.21.1 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. All 1 required mods have matching files.
Where it goes
Is Blast Valve 12 required on the client, server, or both?
The project page does not say whether this file belongs on the client, dedicated server, or both.
The source does not explicitly classify this release as client-only or server-only.
What else does Blast Valve 12 v1.2.2 – NeoForge 1.21.1 need?
Blast Valve 12 v1.2.2 – NeoForge 1.21.1. Change the file and its required mods may change too.
Install Kiloton first. We found matching files for this game-version and loader setup.
We only count dependency files that match this setup. A file for another loader does not fill the gap.
Before you install it
Add Blast Valve 12 without breaking your instance.
Built for Blast Valve 12 v1.2.2 – NeoForge 1.21.1. Pick another file and the loader, install side or required mods may change.
- 01
Stick to this file
Use Blast Valve 12 v1.2.2 – NeoForge 1.21.1. It targets 1.21.1 with NeoForge; another release may have different loader, side or dependency requirements.
- 02
Bring the mods it needs
Install Kiloton first. We found matching files for this game-version and loader setup.
- 03
Put it on the correct side
The project page does not say whether this file belongs on the client, dedicated server, or both.
- 04
Pick the file you checked
Use the “Get this file” button beside Blast Valve 12 v1.2.2 – NeoForge 1.21.1. It opens that exact file at the source.
About this project
What does Blast Valve 12 add?
Blast Valve 12 adds blast protection and a build-your-own retractable bunker shelter for Kiloton. It now includes the solid Thermonuclear-Proof Block for bunker walls and shelters. Craft four with eight obsidian and one netherite ingot.
Build your shelter
- Dig a shaft to the size you want. A 3×3 opening can use a 3×3 platform and a 3-block drop.
- Fill the opening with connected Blast Lift Platform Tiles. Their rectangular footprint sets the platform size.
- Mount Kiloton radar, SAM launchers and other equipment on the platform. Place the Blast Shelter Controller on the rim, within 12 blocks horizontally.
- At roof level (platform level +4), place two banks of Horizontal Blast Doors on opposite sides of the opening. They slide across the hatch to seal it. For a 3×3 opening, use a 2×3 bank on one side and a 1×3 bank opposite it.
Right-click the controller to operate the platform manually. When active Kiloton radar detects a tracked missile predicted to arrive within five seconds and within 48 blocks of the platform, an armed Kiloton SAM can fire its configured shots for up to three seconds. If no SAM is armed, the platform lowers and the doors close immediately. If an armed SAM does not begin engaging within one second, the shelter also retracts. When it does engage, the platform and equipment remain available during the firing window, then lower no later than two seconds before the predicted impact. The two roof-door banks slide over the opening, and Kiloton controls interceptor ammunition and shot count.
The shelter remains closed through the predicted impact and for five seconds afterward, then restores the equipment and block entities. The Thermonuclear-Proof Block is marked indestructible in Kiloton's blast profile regardless of warhead yield, including fully loaded thermonuclear bombs. Closed Horizontal Blast Doors, Blast Valve 12, the controller and lift tiles receive the same protection. TNT, creepers and other vanilla explosions also trigger the shelter and close the blast valve; these blocks have very high vanilla explosion resistance.
Includes a separate Horizontal Blast Trapdoor for a single horizontal opening.
Requirements: Minecraft 1.21.1, NeoForge 21.1 and Kiloton 1.3.x. Install this add-on on both client and server.
Project description from CurseForge.
Pick your setup
Blast Valve 12 by Minecraft version and loader
Choose the version and loader you play, then open the matching release.
1.21.1
1 loader buildCheck the dependencies, then try the file in a copied instance before changing a world you care about.
Recent files
Blast Valve 12 versions and loaders
Blast Valve 12 v1.2.2 – NeoForge 1.21.1
blast-valve-12-1.2.2-neoforge-1.21.1.jar
11 Nov 2026
Blast Valve 12 v1.2.1 – NeoForge 1.21.1
blast-valve-12-1.2.1-neoforge-1.21.1.jar
11 Nov 2026
Blast Valve 12 v1.2.0 – NeoForge 1.21.1
blast-valve-12-1.2.0-neoforge-1.21.1.jar
11 Nov 2026
Blast Valve 12 v1.1.0 – NeoForge 1.21.1
blast-valve-12-1.1.0-neoforge-1.21.1.jar
11 Nov 2026
Blast Valve 12 v1.0.0 – NeoForge 1.21.1
blast-valve-12-1.0.0-neoforge-1.21.1.jar
11 Nov 2026
Looking for an older file? The official CurseForge project page is in Resources.