Back to mods
Architects Measuring Tape project artwork

Modrinth · Minecraft mod

Architects Measuring Tape

A visual aid for building various shapes and paths.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Architects Measuring Tape release should I use?

Updated today
Latest stable file 2.0+mc1.21.1-fabric
Game version 1.21.1
Loader Fabric

Architects Measuring Tape 2.0+mc1.21.1-fabric targets 1.21.1 with Fabric. It must be installed on the client. Do not install it on the dedicated server. No extra mods listed for this file.

Where it goes

Is Architects Measuring Tape required on the client, server, or both?

It must be installed on the client. Do not install it on the dedicated server.

Client Required
Dedicated server Not supported
Loader for this release Fabric
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

This file is marked client-only.

What else does Architects Measuring Tape 2.0+mc1.21.1-fabric need?

2.0+mc1.21.1-fabric. Change the file and its required mods may change too.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add Architects Measuring Tape without breaking your instance.

Built for Architects Measuring Tape 2.0+mc1.21.1-fabric. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use 2.0+mc1.21.1-fabric. It targets 1.21.1 with Fabric; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    It must be installed on the client. Do not install it on the dedicated server.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside 2.0+mc1.21.1-fabric. It opens that exact file at the source.

About this project

What does Architects Measuring Tape add?

Architect's Toolbox

A client-side Minecraft mod for planning builds. Measure shapes in the world, count the blocks inside them, and copy builds as ghost guides or place them in creative.

Works in singleplayer and on multiplayer servers without a server-side install. Structure bounds are singleplayer-only; placing real blocks on a multiplayer server requires command permission.

Installation

Choose the jar for your Minecraft version and loader, remove any older Architect's Toolbox jar, and put the new jar in your client's mods folder.

Minecraft Java Fabric NeoForge
1.21.1 21 Loader 0.16.0+ and Fabric API for 1.21.1 21.1.252
26.3 25 Loader 0.19.5+ and Fabric API for 26.3 26.3.0.71-beta

The NeoForge versions listed are the build targets. Architectury API is no longer required. Version 2 supports 1.21.1 and 26.3 on both loaders, including 26.3's OpenGL and Vulkan backends. There are no v2 builds for 1.21.10 or 1.21.11.

Getting started

  1. Tap G while looking at a block to add a measurement point. For a box, select two opposite corners.
  2. Hold G to open the wheel. Hover an item and release G to choose it, or click the item. Press Esc to cancel.
  3. Scroll to change wheel pages, or click a tab. Use Shift + scroll over an item to adjust its setting.
  4. Choose a shape on the Shape page. Turn on block counting, hollow view or layer view on Measurement.
  5. To start another measurement, pick a colour on Colour, or choose New measurement on Edit to keep the same colour.

The next-point preview shows what another tap would add. Toggle Preview on the Edit page to hide it while keeping the existing measurement visible. Points can still be added with preview off.

Measurements and shapes

Keep several measurements visible at once, each with its own colour, shape and settings. The default limit is 16. Picking a colour starts a new measurement when the active one already has points; it does not recolour the existing measurement. Use Active measurement on Edit to cycle between them, or Shift + scroll over it to cycle in either direction.

Shape What it measures Shift + scroll over its wheel item
Rectangle An inclusive box around the points, with X/Y/Z dimensions Change subdivision guides
Cylinder A cylinder fitted to the points' box, including elliptical cross-sections and even diameters Cycle Y, X and Z axes, and centre + rim mode
Ellipsoid An ellipsoid fitted to the points' box Switch between box-fit and centre + radius
Line Straight segments through the points, with lengths and angles Change tube radius
Spline A smooth curve through the points, with length labels Change tube radius

Switching shapes keeps the points. Line and spline follow the order in which points were added.

On the Measurement page, Count lists non-air blocks inside the filled shape, Hollow shows its block shell, and Layer slices the displayed shape one Y-level at a time. These settings belong to the active measurement. Counts for enabled measurements appear together in their colours. Count still uses the filled shape when hollow view is on.

Clear removes the active measurement; Clear all removes every measurement. Locked ghost placements have their own Clear placements action. Undo and Redo cover measurement edits, locked placements and real block placement.

Clipboard and placement

Choose Copy on Edit to copy non-air block states inside the active shape. Choose Paste to attach a ghost preview to your crosshair, rotate it with Left / Right, and tap G to confirm. Rotation resets for each new paste. Choose Cancel paste to dismiss the preview.

  • Survival and adventure: confirmation locks a ghost guide for building by hand.
  • Creative singleplayer: confirmation places real blocks.
  • Creative multiplayer: confirmation places through paced /fill and /setblock commands when you have permission. Without permission, it locks a ghost guide and shows a message. Server rules and command limits still apply.

Placement fills air by default. Enable Placing replaces blocks in settings to overwrite existing blocks. Copy stores block states only: inventory contents, sign text and other block-entity data are not copied. Undo restores block states, not block-entity contents. Copy and placement use chunks loaded by your client.

Layer view also slices locked ghost guides. Measurements, the clipboard, ghost guides and undo history stay in memory while the client runs, including across world changes, but are not saved to disk. Real placed blocks are saved with the world.

World overlays

The World page controls chunk boundaries, biome borders and structure bounds independently of the active measurement.

  • Chunks: boundaries around your current chunk, using the world's actual height.
  • Biomes: nearby borders and biome IDs at your current elevation.
  • Structures: boxes and IDs for structures intersecting client-loaded chunks, with a colour per structure type. Shift + scroll over the item to show piece boxes, such as village houses or stronghold rooms. Singleplayer only.

Controls

All bindings are under Options → Controls → Architect's Toolbox, and can be changed to keyboard or mouse buttons.

Default input Action
G, tap Add a point or confirm a paste
G, hold Open the wheel; release to choose the hovered item
Scroll in the wheel Change page
Shift + scroll over a wheel item Adjust its option
Up / Down Step through layers
Left / Right Rotate the paste preview by 90°
Unbound Toggle next-point preview
Unbound Pick the next palette colour

Commands

These commands run on the client. Measurement commands act on the active measurement.

Command Action
/atb pos1 <x> <y> <z> Set the first point
/atb pos2 <x> <y> <z> Set the second point; requires a first point
/atb clear Remove the active measurement
/atb clear all Remove every measurement
/atb shape <rectangle|cylinder|ellipsoid|spline|line> Change shape
/atb color <name|#rrggbb> Pick a colour, starting a new measurement if the active one has points
/atb info Show shape, points, bounds, box size/volume and the completed count when enabled; click coordinates to copy
/atb identify [radius] List biomes and, in singleplayer, structures in the measurement's box, or around you without points; optional radius 0–256
/atb config Open settings on either loader

For example, /atb color blue or /atb color #55aaff picks a colour. Command completion suggests colour names and palette entries.

Settings and limits

Open /atb config, or use the mod-list config button on NeoForge. Fabric does not require Mod Menu and uses the command.

Settings are saved in config/architects_toolbox.json: ghost style (solid or wireframe), ghost opacity, whether placement replaces blocks, the colour palette and the measurement limit. New installations use solid ghosts at 50% opacity, an eight-colour palette and a 16-measurement limit.

Large operations have limits and display messages when exceeded. Copy allows up to 1,000,000 copied blocks and a 16,000,000-block scan. Ghost models stop above 250,000 displayed blocks, and detailed outlines fall back to a box above 200,000 faces. Very large copies can briefly pause the client.

Project description from Modrinth.

Pick your setup

Architects Measuring Tape by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

8 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Architects Measuring Tape versions and loaders

8 of 8 releases match

Looking for an older file? The official Modrinth project page is in Resources.