CurseForge · Minecraft mod
Thermite
A fabric mod that adds a body temperature system.
Quick answer
Which Thermite release matches Fabric?
Thermite 5.0.0 targets 1.20.1 with Fabric. Installation on the client is optional. Installation on the dedicated server is optional. 1 required mod needs a matching file.
Where it goes
Is Thermite required on the client, server, or both?
Installation on the client is optional. Installation on the dedicated server is optional.
The source marks this as usable on both the client and server.
What else does Thermite 5.0.0 need?
5.0.0 on Fabric. Every mod below is checked against that same setup.
Install Fabric API, CompleteConfig first, but 1 required mod has no matching file for this setup. Do not mix loader builds to force a match. 3 come through another mod in the chain.
3 extra mods were pulled in by other dependencies. Indented rows show who needs each one. We only count dependency files that match this setup. A file for another loader does not fill the gap.
Before you install it
Add Thermite without breaking your instance.
Built for Thermite 5.0.0 on Fabric. Pick another file and the loader, install side or required mods may change.
- 01
Stick to this file
Use 5.0.0. It targets 1.20.1 with Fabric; another release may have different loader, side or dependency requirements.
- 02
Bring the mods it needs
Install Fabric API, CompleteConfig first, but 1 required mod has no matching file for this setup. Do not mix loader builds to force a match. 3 come through another mod in the chain.
- 03
Put it on the correct side
Installation on the client is optional. Installation on the dedicated server is optional.
- 04
Pick the file you checked
Use the “Get this file” button beside 5.0.0. It opens that exact file at the source.
About this project
What does Thermite add?
License
This mod is available under the MIT license.
Dependencies
Fabric Api >=0.83.1 for mc 1.20.1
CompleteConfig >=2.4.0 for mc 1.20.1
Roughly Enough Items (Recommended)
Description
This is a fabric mod that adds a body temperature system based on what biome you are in, the time of day, weather conditions and what blocks are around you. If you get too cold or hot you will start to take damage, but there are ways to maintain a good temperature.
In vanilla minecraft, biomes have there own built in temperature. This mod takes that temperature and determines how cold or hot you should feel. So it should work with any modded biome as long as its biome temperature is set appropriately.
Heating
Heat making blocks will slowly increase your temperature if you are less than 3 blocks away. Torches increase temperature by 3, fire also 3, lava 8 and campfires 16. You can also increase your temperature by wearing leather armor. Boots increase by 1, leggings 2, chestplate 3 and helmet 1.
Cooling
Cold making blocks do the opposite of heat making blocks and cool you down but within a shorter range (2 blocks). Ice decreases by 1, packed ice decreases by 3 and blue ice decreases by 6. This is useful if you are in a hot climate since you can just put some ice under your floor and that will cool you down, or in the nether if you don't have fire resistance.
You will also become colder if it rains, snows, its nighttime or if you get in water. Fire resistance will stop you from taking any damage from high temperature. So if you are too hot drink fire resistance or make ice juice. (use REI to see ice juice recipe). Ice juice is very useful in the nether before you get fire resistance.
Brick Fireplace Mechanics
The brick fireplace block, when lit, will heat you up by 16 in a large radius. You can light it by right clicking it with fuel items. Coal and charcoal fuel it for 60 seconds, coal blocks 540 seconds and sticks 5 seconds.
Putting brick walls, cobblestone walls or stone brick walls above the fireplace cause the smoke it makes to come out above the walls like a chimney.
Ice Box Mechanics
The ice box is a new block added that can be used to get ice easier before getting silk touch. First craft and empty ice box (use REI for recipe). Then you can right click it with a water bottle to fill it with water. For it to make ice it needs to be in a cold or frigid climate (taiga biomes and snowy biomes will be fine). When you have filled it and it is in a cold or frigid climate you just have to wait and it will freeze. Once it has frozen you can right click it and it will give you 3 ice and turn back into an empty ice box.
When it is in a frozen state it will act like packed ice and cool you down by 3 if you are near enough. But it will slowly melt and turn back into its unfrozen state in biomes than are not cold or frigid. The hotter the biome the faster it melts.
Temperature Display and Thermometer
The temperature display is a thermometer in the center of your hotbar. It will start turning blue as you get colder and start turning orange as you get hotter. It will become icy if you are getting colder and fiery if you are getting hotter. It will also shake if you are hot or cold enough to take damage.
Neutral:
<img src="" rel="noopener nofollow" target="_blank">https://cdn-raw.modrinth.com/data/ggmtYNuc/images/e3c69a4f9be896e32cf14ebd37f4cf240fa9cfd5.png" width="50%" height="50%">
Cold:
<img src="" rel="noopener nofollow" target="_blank">https://cdn-raw.modrinth.com/data/ggmtYNuc/images/a8fa37f97c493955b0fbfec647f91c89a26280ba.png" width="50%" height="50%">
Hot:
<img src="" rel="noopener nofollow" target="_blank">https://cdn-raw.modrinth.com/data/ggmtYNuc/images/5c7f92d95cd94c9c6629885d9a5194349a0cb30f.png" width="50%" height="50%">
The temperature display alone does not show your exact temperature as a number, but if you hold a thermometer in your offhand a display will pop up on your left showing your exact temperature. the number it shows is not any specific unit of temperature like celsius or fahrenheit. 50 is your preferred temperature.
<img src="" rel="noopener nofollow" target="_blank">https://cdn-raw.modrinth.com/data/ggmtYNuc/images/d7174e2fc4a91741f75495a9c9cf50f4167ae4d2.png" width="50%" height="50%">
Compatible
Compatible with Fabric Seasons. Your temperature will be affected by the current season.
Incompatible
Incompatible with C2ME.
Config
Config file path is "config/therm.conf", if you want something added to the config create an issue on github.
Project description from CurseForge.
Pick your setup
Thermite by Minecraft version and loader
Choose the version and loader you play, then open the matching release.
1.20.1
1 loader buildCheck the dependencies, then try the file in a copied instance before changing a world you care about.
Recent files
Thermite versions and loaders
5.0.0
thermite-5.0.0_mc-1.20.1.jar
24 Feb 2024
Thermite 4.1.0
thermite-4.1.0_mc-1.20.1.jar
16 Oct 2023
Thermite 4.0.0
thermite-4.0.0_mc-1.20.1.jar
1 Sept 2023
Thermite 3.3.1
thermite-3.3.1_mc-1.20.1.jar
30 Aug 2023
Thermite 3.3.0
thermite-3.3.0_mc-1.20.1.jar
29 Aug 2023
Thermite 3.2.0
therm-3.2.0_mc-1.20.1.jar
11 Aug 2023
Thermite 3.1.0
thermite-3.1.0_mc-1.20.1.jar
9 Aug 2023
Thermite 3.0.0
thermite-3.0.0_mc-1.20.1.jar
26 Jul 2023
Thermite 2.2.0
thermite-2.2.0_mc-1.20.1.jar
18 Jul 2023
Thermite 2.1.0
thermite-2.1.0_mc-1.20.1.jar
17 Jul 2023
Thermite 2.0.0
thermite-2.0.0_mc-1.20.1.jar
6 Jul 2023
Thermite 1.1.0
thermite-1.1.0_mc-1.20.1.jar
3 Jul 2023
Looking for an older file? The official CurseForge project page is in Resources.