Back to mods
PackPulse project artwork

Modrinth · Minecraft mod

PackPulse

Open-source Fabric mod updater that syncs mods, configs, resource packs, and shader packs from a remote manifest before you play.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which PackPulse release matches 1.20.2?

Updated 6 months ago
Best match for your filters 1.0.2
Game version 1.20, 1.20.1, 1.20.2
Loader Fabric

PackPulse 1.0.2 targets 1.20, 1.20.1, 1.20.2 with Fabric. It must be installed on the client. Do not install it on the dedicated server. No extra mods listed for this file.

Where it goes

Is PackPulse required on the client, server, or both?

It must be installed on the client. Do not install it on the dedicated server.

Client Required
Dedicated server Not supported
Loader for this release Fabric
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

This file is marked client-only.

What else does PackPulse 1.0.2 need?

1.0.2 on 1.20.2. Every mod below is checked against that same setup.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add PackPulse without breaking your instance.

Built for PackPulse 1.0.2 on 1.20.2. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use 1.0.2. It targets 1.20, 1.20.1, 1.20.2 with Fabric; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    It must be installed on the client. Do not install it on the dedicated server.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside 1.0.2. It opens that exact file at the source.

About this project

What does PackPulse add?

PackPulseMod

PackPulseMod is an open-source client-side updater for private Minecraft modpacks.

It is designed for server owners and small communities who want players to keep their pack folders in sync without shipping a full launcher.

PackPulseMod is not tied to any specific server. You host your own files and manifest.json, then set the manifest URL in the client config.

Features

  • Syncs missing or changed files on Minecraft startup
  • Uses SHA-256 hashes for file checks
  • Supports mods, config, resourcepacks, shaderpacks, extra top-level mod folders, and optional options.txt
  • Shows a confirmation screen before downloading
  • Lets players choose which files to download
  • Includes a scrollable file list
  • Shows clean mod/file names without .jar, .zip, .txt, etc.
  • Has a Download all button
  • Supports HTTP and HTTPS manifest URLs
  • Supports explicit file removal through the manifest delete list
  • Can optionally remove stale files that are no longer in the manifest
  • Shows a restart screen when updated .jar mods require a restart

Supported Builds

Loader Minecraft versions
Fabric 1.20.1 - 1.20.6
Fabric 1.21 - 1.21.11
NeoForge 1.20.5 - 1.20.6
NeoForge 1.21 - 1.21.11

Client Setup

  1. Install the correct Fabric Loader or NeoForge version.
  2. Put the matching PackPulseMod jar into .minecraft/mods.
  3. Start Minecraft once to create the config.
  4. Close Minecraft.
  5. Open:
.minecraft/config/packpulse.json
  1. Replace the example manifestUrl with your own URL:
{
  "manifestUrl": "https://your-domain.example/packpulse/manifest.json",
  "removeFilesMissingFromManifest": false,
  "updateOnStartup": true,
  "showProgressWindow": true,
  "autoRestartAfterModUpdates": false,
  "restartExecutable": ""
}

The default URL is only a placeholder. You must host your own manifest.

Server Pack Layout

Put pack files on your server like this:

server-pack/
  mods/
  config/
  defaultconfigs/
  kubejs/
  resourcepacks/
  shaderpacks/
  options.txt

options.txt is optional.

Manifest

PackPulseMod expects a JSON manifest with file paths, download URLs, SHA-256 hashes, and an optional delete list for files that should be removed from clients.

The repository includes scripts that can generate and deploy this manifest automatically. When a previously published file disappears from the server pack, the generator adds it to delete, so old renamed mods can be removed safely.

Example script workflow:

sudo mkdir -p /opt/packpulse/scripts /opt/packpulse/server-pack
cd /opt/packpulse

curl -fsSL -o scripts/generate_manifest.py https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/generate_manifest.py
curl -fsSL -o scripts/deploy_http_ip.sh https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/deploy_http_ip.sh
curl -fsSL -o scripts/deploy_https_letsencrypt.sh https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/deploy_https_letsencrypt.sh
chmod +x scripts/deploy_http_ip.sh scripts/deploy_https_letsencrypt.sh

HTTP by IP:

sudo ./scripts/deploy_http_ip.sh --server-ip YOUR_SERVER_IP

HTTPS with domain and Let's Encrypt:

sudo ./scripts/deploy_https_letsencrypt.sh --domain files.example.com --email you@example.com

After changing your pack files, run the same deploy script again.

Notes

  • This mod is client-side.
  • It is meant for private packs, server packs, and community packs.
  • For public releases, test the edge versions of each supported Minecraft range.

Русский

PackPulseMod - это open-source клиентский мод для автоматического обновления приватных Minecraft-сборок.

Он подходит для владельцев серверов и небольших сообществ, которым нужно синхронизировать папки сборки у игроков без отдельного лаунчера.

PackPulseMod не привязан к конкретному серверу. Ты размещаешь свои файлы и manifest.json, а затем указываешь ссылку на manifest в конфиге клиента.

Возможности

  • Синхронизация отсутствующих или измененных файлов при запуске Minecraft
  • Проверка файлов по SHA-256
  • Поддержка mods, config, resourcepacks, shaderpacks, дополнительных папок модов и опционального options.txt
  • Экран подтверждения перед скачиванием
  • Выбор, какие файлы скачивать
  • Список файлов со скроллом
  • Красивые названия файлов без .jar, .zip, .txt и других расширений
  • Кнопка Скачать всё
  • Поддержка HTTP и HTTPS ссылок на manifest
  • Явное удаление файлов через список delete в manifest
  • Опциональное удаление устаревших файлов, которых больше нет в manifest
  • Экран перезапуска, если после обновления .jar-модов нужен перезапуск

Поддерживаемые Сборки

Лоадер Версии Minecraft
Fabric 1.20.1 - 1.20.6
Fabric 1.21 - 1.21.11
NeoForge 1.20.5 - 1.20.6
NeoForge 1.21 - 1.21.11

Настройка Клиента

  1. Установи подходящий Fabric Loader или NeoForge.
  2. Положи нужный jar PackPulseMod в .minecraft/mods.
  3. Запусти Minecraft один раз, чтобы создался конфиг.
  4. Закрой Minecraft.
  5. Открой:
.minecraft/config/packpulse.json
  1. Замени примерный manifestUrl на свою ссылку:
{
  "manifestUrl": "https://your-domain.example/packpulse/manifest.json",
  "removeFilesMissingFromManifest": false,
  "updateOnStartup": true,
  "showProgressWindow": true,
  "autoRestartAfterModUpdates": false,
  "restartExecutable": ""
}

Стандартная ссылка является только примером. Нужно разместить свой manifest.

Структура Серверной Сборки

Файлы сборки на сервере должны лежать так:

server-pack/
  mods/
  config/
  defaultconfigs/
  kubejs/
  resourcepacks/
  shaderpacks/
  options.txt

options.txt необязателен.

Manifest

PackPulseMod ожидает JSON manifest с путями файлов, ссылками для скачивания, SHA-256 хэшами и опциональным списком delete для удаления файлов у клиентов.

В репозитории есть скрипты, которые могут автоматически создать manifest и развернуть файлы на сервере. Если ранее опубликованный файл исчез из серверной сборки, генератор добавит его в delete, чтобы старые переименованные моды удалялись безопасно.

Пример:

sudo mkdir -p /opt/packpulse/scripts /opt/packpulse/server-pack
cd /opt/packpulse

curl -fsSL -o scripts/generate_manifest.py https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/generate_manifest.py
curl -fsSL -o scripts/deploy_http_ip.sh https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/deploy_http_ip.sh
curl -fsSL -o scripts/deploy_https_letsencrypt.sh https://raw.githubusercontent.com/Kamilhik/PackPulseMod/main/scripts/deploy_https_letsencrypt.sh
chmod +x scripts/deploy_http_ip.sh scripts/deploy_https_letsencrypt.sh

HTTP по IP:

sudo ./scripts/deploy_http_ip.sh --server-ip YOUR_SERVER_IP

HTTPS через домен и Let's Encrypt:

sudo ./scripts/deploy_https_letsencrypt.sh --domain files.example.com --email you@example.com

После изменения файлов сборки просто запусти тот же deploy-скрипт снова.

Примечания

  • Мод работает на стороне клиента.
  • Подходит для приватных сборок, серверных сборок и сборок небольших сообществ.
  • Перед публичным релизом лучше проверить крайние версии каждого поддерживаемого диапазона Minecraft.

License

MIT

Project description from Modrinth.

Pick your setup

PackPulse by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

33 available setups

Showing the newest 12 of 19 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

PackPulse versions and loaders

2 of 13 releases match
Clear filters

Looking for an older file? The official Modrinth project page is in Resources.