modpacks.ch by CreeperHost No ads. Just mods.
Back to mods
Bat Membrane (No Phantoms) project artwork

Modrinth · Minecraft mod

Bat Membrane (No Phantoms)

Disables phantoms and enables to get phantom membrane from bats

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Bat Membrane (No Phantoms) release should I use?

Updated 26 days ago
Latest stable file v3.1.5+mod
Game version 1.21.6, 1.21.7, 1.21.8
Loader Fabric, Forge, NeoForge

Bat Membrane (No Phantoms) v3.1.5+mod targets 1.21.6, 1.21.7, 1.21.8 with Fabric, Forge, NeoForge. Installation on the client is optional. Installation on the dedicated server is optional. All 1 required mods have matching files.

Where it goes

Is Bat Membrane (No Phantoms) required on the client, server, or both?

Installation on the client is optional. Installation on the dedicated server is optional.

Client Optional
Dedicated server Optional
Loader for this release Fabric, Forge, NeoForge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source marks this as usable on both the client and server.

Understand client and server requirements Read the Minecraft installation guide

What else does Bat Membrane (No Phantoms) v3.1.5+mod need?

v3.1.5+mod. Change the file and its required mods may change too.

All 1 required mods have matching files

Install 5555ff-lib first. We found matching files for this game-version and loader setup.

5555ff-lib Needed by Bat Membrane (No Phantoms) v3.1.5+mod
required
Matching file found Matched file: v1.1.4+mod

We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add Bat Membrane (No Phantoms) without breaking your instance.

Built for Bat Membrane (No Phantoms) v3.1.5+mod. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use v3.1.5+mod. It targets 1.21.6, 1.21.7, 1.21.8 with Fabric, Forge, NeoForge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    Install 5555ff-lib first. We found matching files for this game-version and loader setup.

  3. 03

    Put it on the correct side

    Installation on the client is optional. Installation on the dedicated server is optional.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside v3.1.5+mod. It opens that exact file at the source.

About this project

What does Bat Membrane (No Phantoms) add?

minecraft datapack

jodeks discord - discord badge - pixel badge - pixel discord badge - jodeks datapacks - datapacks discord  
datapacks jodek youtube  
bat membrane minecraft datapack github issues  
jodeks datapacks kofi - jodek kofi - minecraft datapack kofi donation  
github sponsor jodek donation datapacks minecraft

Features

1. Phantoms are disabled

2. Bats drop phantom membrane

Alterations

You can get the "Ol Betsy" advancement by killing two bats with one arrow

If you use my Mob Heads datapack/mod, you can get the phantom head from bats

Guides

How to Install a Datapack in Singleplayer
At the Creation of a World

How to install a datapack in singleplayer

  1. Open Minecraft
    Launch the game.

  2. Create a New World
    Navigate to "More" and click on "Data Packs".

    Minecraft Settings Image

  3. Add the Datapack
    Drag the datapack (a .zip file or directory) into the Minecraft window.

    • A confirmation screen will appear. Click "Yes".

  4. Activate the Datapack
    Move the datapack to the right-hand side of the screen by clicking the triangle on its icon (visible when hovering over it).

Minecraft Settings Image

  1. Complete World Creation
    • Click "Done" at the bottom of the screen.
    • Continue creating your world and click "Create New World".

⚠️ IMPORTANT ⚠️

The datapack only works if cheats are enabled.

You can verify the datapack is active by typing:
/datapack list enabled

This command should list an entry named [file/<your datapack file/directory name>].

In an Existing World

How to Install a Datapack in an Existing Singleplayer World

  1. Open Minecraft
    Launch the game.

  2. Select Your World

    • Choose the world you want to install the datapack for.
    • Click "Edit", then "Open World Folder".

  3. Add the Datapack

    • Open the folder named datapacks.
    • Place the datapack into this folder. It should be a .zip file or a directory.

  4. Reload the World

    • If you are in the world during installation, type /reload in the chat or press F3 + T to reload resources.
      (Make sure cheats are enabled.)

⚠️ IMPORTANT ⚠️

The datapack only works if cheats are enabled.

You can verify the datapack is active by typing:
/datapack list enabled

How to Enable Cheats Permanently After World Creation

If you encounter this issue, here is a step by step guide on how to enable Cheats/Admincommands permanently after you have already created a Minecraft world.

⚠️ Before you begin, you should save and backup your world in case something goes wrong.
(I will not take any responsibility for any corrupt worlds. Do this at your own risk!)
But don't worry this works without any problems.
If you don't want to change this permanently check out this guide.

1. You need NBTExplorer

NBTExplorer is an open-source NBT editor for all common sources of NBT data. It's mainly intended for editing Minecraft game data.

2. Open NBTExplorer and open your Minecraft world, where you want to enable Cheats/Admincommands.

NBTExplorer Image

3. Navigate to:

  • <Your Minecraft World>
  • level.dat
  • Data
  • allowCommands

NBTExplorer Navigation Image

4. Click on "Edit Tag Value"

Edit Tag Image

5. Change the Value from 0 to 1 and click "OK"

Change Value Image

6. Now click on "Save All Modified Tags"

Save Image

That's it. You are done. You can now join your world and check if you have permission to change your gamemode, for example.

How to Enable Cheats Temporarily After World Creation

Enabling Cheats Temporarily After World Creation

If you encounter this issue, here is a step-by-step guide on how to enable Cheats/Admin commands temporarily after you have already created a Minecraft world.

  1. Join Your World
    Open your single-player world and press "Escape".

  2. Open to LAN
    Click on "Open to LAN".

    Open to LAN Screenshot

  3. Allow Commands
    Set "Allow Commands" to ON.

    LAN World Minecraft Screen

  4. Start LAN World
    Click "Start LAN World" to apply the changes.

LAN World MC Screen

Now, you should be able to use commands like changing your gamemode. Keep in mind that this is only temporary and will need to be done every time you join the world.

How to Install a Datapack in Multiplayer

How to Install a Datapack in Multiplayer

  1. Open Your Server Folder
    Navigate to your server folder, then open the folder for the world you wish to install the datapack in (default: world).

  2. Add the Datapack

    • The datapack should be a .zip file.
    • Place the datapack into a folder named datapacks inside the world folder.

  3. Reload the Server

    • Type /reload from the console or as a level 3 operator if the server was running during the installation.
How to Uninstall a Datapack

How to Uninstall a Datapack from Your Singleplayer World or Server

  1. Run the Uninstall Command
    For my datapacks, run the command:
    /function datapack_name:uninstall

  2. Delete the Datapack

    • Delete the datapack from the folder you placed it in.
    • Alternatively, you can run:
      /datapack disable [file/your data pack file/directory name]

  3. Reload the World or Server
    After deleting or disabling the datapack, run:
    /reload

How to Install a Mod on a Minecraft Server

Step-by-Step Guide to Installing a Mod on a Minecraft Server

  1. Download the Mod

    • Make sure to download the correct version of the Mod that matches your server's Minecraft version.
    • Important: The mod file should be a .jar file.

  2. Ensure No Datapacks or Other Mods Conflict

    • Do not have both a datapack and a mod installed at the same time, as they may conflict.
    • Only install one or the other, depending on your server's setup.

  3. Locate the Mods Folder

    • Open your server's root directory.
    • Inside this directory, find the folder named mods.
    • If the mods folder doesn't exist, create one.

  4. Install the Mod

    • Paste the downloaded .jar file for the Mod into the mods folder.

  5. Restart the Server

    • After adding the Mod to the mods folder, restart your Minecraft server for the mod to be activated.

  6. Verify Mod Installation

    • Once the server has restarted, join the server and check if the Mod is working.
    • You can use /mods or a similar command (depending on the mod) to see if the Mod has been successfully loaded.

Additional Tips

  • Backup Your Server: Always create a backup before installing the Mod to avoid data loss in case something goes wrong.
  • Ensure Mod Compatibility: Check that the Mod is compatible with your Minecraft server version and any other mods you have installed.

Project description from Modrinth.

Pick your setup

Bat Membrane (No Phantoms) by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

100 available setups

Showing the newest 12 of 21 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Bat Membrane (No Phantoms) versions and loaders

47 of 47 releases match

Looking for an older file? The official Modrinth project page is in Resources.

Keep browsing

See more mods

Like this one? One of these might be worth a look.