CurseForge · Minecraft mod
More-Create-Burners-With-Ember-Burner
adds an Ember Burner to Create — a burner powered by Embers Re-Ignited ember energy
Quick answer
Which More-Create-Burners-With-Ember-Burner release should I use?
More-Create-Burners-With-Ember-Burner morecreateburnerswithemberburner-1.0.2.jar targets 1.21.1 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. All 3 required mods have matching files.
Where it goes
Is More-Create-Burners-With-Ember-Burner required on the client, server, or both?
The project page does not say whether this file belongs on the client, dedicated server, or both.
The source does not explicitly classify this release as client-only or server-only.
What else does More-Create-Burners-With-Ember-Burner morecreateburnerswithemberburner-1.0.2.jar need?
morecreateburnerswithemberburner-1.0.2.jar. Change the file and its required mods may change too.
Install Create, More Create Burners, Embers Re-Ignited first. We found matching files for this game-version and loader setup. 5 come through another mod in the chain.
5 extra mods were pulled in by other dependencies. Indented rows show who needs each one. We only count dependency files that match this setup. A file for another loader does not fill the gap.
Before you install it
Add More-Create-Burners-With-Ember-Burner without breaking your instance.
Built for More-Create-Burners-With-Ember-Burner morecreateburnerswithemberburner-1.0.2.jar. Pick another file and the loader, install side or required mods may change.
- 01
Stick to this file
Use morecreateburnerswithemberburner-1.0.2.jar. It targets 1.21.1 with NeoForge; another release may have different loader, side or dependency requirements.
- 02
Bring the mods it needs
Install Create, More Create Burners, Embers Re-Ignited first. We found matching files for this game-version and loader setup. 5 come through another mod in the chain.
- 03
Put it on the correct side
The project page does not say whether this file belongs on the client, dedicated server, or both.
- 04
Pick the file you checked
Use the “Get this file” button beside morecreateburnerswithemberburner-1.0.2.jar. It opens that exact file at the source.
About this project
What does More-Create-Burners-With-Ember-Burner add?
A NeoForge 1.21.1 mod that adds an Ember Burner to Create — a burner powered by Embers Re-Ignited ember energy.
It is an addon for More Burners, built on its burner framework (BaseBurnerBlock / BaseBurnerBlockEntity), and can fuel any Create machine that needs heat — basins, boilers, and more — as an alternative to the Blaze Burner.
Features
- Ember-powered: The burner consumes Ember Energy to heat up gradually, providing Create's standard heat levels (Smouldering → Kindled → Seething). Once lit, it supplies full heat to boilers as well;
- Huge capacity: 6000 ember, consuming 1 ember per tick (stops heating and slowly cools down when ember runs out);
- Ember sharing: Horizontally adjacent Ember Burners automatically equalize their ember reserves, keeping an array uniformly fueled;
- Bellows interaction: Pair with an Atmospheric Bellows to exceed the heat cap:
Bellows position Max heat Heating/cooling rate None 300 ×1 Adjacent (facing) 400 (reaches Superheated/Seething) ×2 1 block away (through a block) 340 ×1 - Input from any side: Ember can be fed through Embers' Ember Receptor from any of the four horizontal directions;
- Information display: Supports Create's Goggles (shows ember consumption per second) and Embers' Dial (reads current/max heat);
- Cover detection: When covered on top, spark particles stop (the block list is configurable via More Burners' client config);
- Bilingual: Built-in Simplified Chinese (余烬燃烧室) and English (Ember Burner) language files.
Configuration
All values can be adjusted via config/morecreateburnerswithemberburner-common.toml — no restart needed, changes take effect immediately:
| Key | Default | Description |
|---|---|---|
[ember_burner] max_capacity |
6000.0 | Maximum ember capacity |
ember_cost |
1.0 | Ember consumed per tick |
heating_rate |
1.5 | Heat gained per second while consuming ember |
cooling_rate |
1.0 | Heat lost per second when ember runs out |
rate_multiplier |
2.0 | Heating/cooling multiplier with an adjacent bellows |
max_heat |
300.0 | Max heat without bellows |
max_heat_1 |
400.0 | Max heat with an adjacent bellows |
max_heat_2 |
340.0 | Max heat with a bellows 1 block away |
Dependencies
| Mod | Version | Type |
|---|---|---|
| NeoForge | 21.1.244+ (MC 1.21.1) | Required |
| Create | 6.0.10+ | Required |
| More Burners | 1.21.1-0.3.6+ | Required |
| Embers Re-Ignited | 1.21.1-1.5.7+ | Required |
License & Credits
- This mod is released under the MIT license;
- Built on More Burners' (MIT, by DragonEgg) burner framework, reusing its block models and textures — thanks to the original author;
- Uses Create's (MIT) heat source API and Embers Re-Ignited's (MIT) ember energy API.
Project description from CurseForge.
Pick your setup
More-Create-Burners-With-Ember-Burner by Minecraft version and loader
Choose the version and loader you play, then open the matching release.
1.21.1
1 loader buildCheck the dependencies, then try the file in a copied instance before changing a world you care about.
Recent files
More-Create-Burners-With-Ember-Burner versions and loaders
morecreateburnerswithemberburner-1.0.2.jar
27 Aug 2026
morecreateburnerswithemberburner-1.0.1.jar
12 Aug 2026
morecreateburnerswithemberburner-1.0.0.jar
12 Aug 2026
Looking for an older file? The official CurseForge project page is in Resources.