Back to mods
Weather Glass project artwork

CurseForge · Minecraft mod

Weather Glass

Rain, snow and frost on your windows: raindrops running down the glass, snowflakes and frost. Pixel art, client side.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Weather Glass release matches Forge?

Updated 5 days ago
Best match for your filters Weather Glass 0.6.2 for 1.20.1 (Forge)
Game version 1.20.1
Loader Forge

Weather Glass 0.6.2 for 1.20.1 (Forge) targets 1.20.1 with Forge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.

Where it goes

Is Weather Glass required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release Forge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Weather Glass 0.6.2 for 1.20.1 (Forge) need?

Weather Glass 0.6.2 for 1.20.1 (Forge) on Forge. Every mod below is checked against that same setup.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

Particle Rain Optional for Weather Glass 0.6.2 for 1.20.1 (Forge)
optional
Matching file found Matched file: v4.0.3 for 1.20.1-forge

We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add Weather Glass without breaking your instance.

Built for Weather Glass 0.6.2 for 1.20.1 (Forge) on Forge. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use Weather Glass 0.6.2 for 1.20.1 (Forge). It targets 1.20.1 with Forge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside Weather Glass 0.6.2 for 1.20.1 (Forge). It opens that exact file at the source.

About this project

What does Weather Glass add?

🌧️ Rain · ❄️ Snow & frost · 🏜️ Dust storms · 💨 Breath on the glass · Minecraft pixel art · Client side

Weather Glass makes the weather show on your windows. When it rains, raindrops land on the outside of the glass, merge and run down leaving a wet trail. When it snows, frost creeps in from the edges of the window, snowflakes stick to the glass and snow piles up at the bottom. After a storm in the desert, sand settles along the frame. Get close to a frosted window and your breath fogs it up. All in pixel art that fits right into Minecraft.

✨ New in 0.5.0

For Minecraft 26.3 and 1.21.1, on Fabric and NeoForge.

  • Vanilla detail: rain, snow and dust can now be drawn at 16 pixels per block, the same as Minecraft's own textures, and that is the new default. The setting is called Detail: Vanilla (16x), Detailed (32x) or Very detailed (64x).
  • Dust storms (beta): when a storm passes over a dry biome, sand settles on your windows. Red sand in the badlands.
  • Particle Rain compatibility (beta): the drops and the sand on your windows follow Particle Rain's wind, and its rain streaks stay off the glass.
  • Drops cross the edges between glass blocks: on wide and tall windows they run on into the next block.
  • A tidier settings screen: the same rows for rain, snow and dust, plain dark previews, beta features marked.
  • Lighter: windows far away stand still, and nothing is drawn when the weather is clear and the glass is dry.

🌧️ Rain

Rain: drops at 16x, 32x and 64x

  • Drops of mixed sizes land on the side of the glass the rain reaches. When they get heavy they run down in jerks, pick up the drops in their way and leave a trail as wide as they are.
  • A drop running out of a block goes on into the next one, sideways and down, so big windows read as one pane of glass.
  • Glass under a short canopy (1-2 blocks) still gets wet, because rain falls at a slant. Under a deep porch it stays dry.
  • After the rain the glass dries in about half a minute.
  • Two styles: Drops (default) or Streaks, thin trickles running down.

Rain: streaks at 16x, 32x and 64x

❄️ Snow and frost

Snow and frost at 16x, 32x and 64x

  • In cold biomes (and high up in the mountains) frost grows in from the edges of the window, thicker in the corners. It grows more at night and while it snows, and slowly thaws again.
  • Snowflakes stick to the glass while it snows and go one by one when it stops.
  • Snow piles up at the bottom of the window, on the outside, heaped in the corners.
  • Frost on the inside too, on windows that face the outside; it can be switched off.

💨 Breath on the glass

Breath on the glass

  • Stand with your face close to a frosted window (inside or outside) and you breathe on it: a soft patch of fog grows there, one breath after another.
  • Step back and it fades away in about five seconds.
  • Only on cold glass, never in spectator mode, and it can be switched off.

🏜️ Dust storms (beta)

Dust storms at 16x, 32x and 64x

  • When a storm passes over a dry biome (deserts, savannas, and the dry biomes of other mods), sand settles on the windows: along the frame, as a light patina on the glass, in grains, and heaped at the bottom.
  • In the badlands the sand is red.
  • An ordinary storm leaves some, a thunderstorm a lot; a few minutes after the storm the wind has taken it away.
  • The dust textures are still being tested and can look a little buggy.

🌬️ Particle Rain (beta)

With Particle Rain installed, Weather Glass follows its wind:

  • The windows facing the wind get more drops and more sand, the sheltered ones less, and the drops lean with the gusts.
  • Particle Rain's rain streaks are kept off the glass, where Weather Glass draws its own drops (they stay on the other blocks).
  • A note in the chat tells you so the first time. The wind can be switched off in the settings: the windows even out again within a few seconds.

⚙️ Settings

Settings

In the settings screen (Mod Menu on Fabric, the Mods list on NeoForge), or in config/weatherglass.properties. The little windows at the top show the rain, the snow and the dust with your settings, live.

Rain

Setting Values
Rain on glass Off / Light / Normal / Heavy
Detail Vanilla (16x) / Detailed (32x) / Very detailed (64x)
Style Drops / Streaks

Snow

Setting Values
Snow and frost Off / Light / Normal / Heavy
Detail Vanilla (16x) / Detailed (32x) / Very detailed (64x)
Frost inside too On / Off
Breath on the glass On / Off

Dust storms

Setting Values
Dust storms Off / Light / Normal / Heavy
Detail Vanilla (16x) / Detailed (32x) / Very detailed (64x)

With Particle Rain installed there is one more switch, Wind of Particle Rain (On / Off).

Your settings from 0.4 carry over; new installs start at Vanilla.

🤝 Works with

  • Every vanilla glass: glass blocks, glass panes, all stained glass and tinted glass.
  • Sodium, Iris, Continuity (connected glass) and MoreCulling (tested on Fabric). With shader packs the drops take the pack's own look of glass.
  • Particle Rain (beta), on Fabric and NeoForge.
  • Client side only: it works on any server, nothing to install there.

⚡ Performance

The weather is part of the glass's own chunk mesh and is animated like vanilla's animated textures, once a tick, straight into the block atlas: no extra render pass. It only runs while some glass nearby is wet or snowy, and windows more than a few chunks away stand still. While it rains: about 0.2 ms per tick at Vanilla, 0.4 ms at Detailed and 1.1 ms at Very detailed; nothing when the weather is clear and the glass is dry.

📦 Versions and requirements

Minecraft Fabric NeoForge
26.3 ✅ ✅
1.21.1 ✅ ✅
  • Fabric: Fabric Loader and Fabric API; Mod Menu (optional, for the settings screen)
  • NeoForge: nothing else

⚠️ Known limitations

  • The dust textures are still being tested and can look a little buggy; the Particle Rain wind is new too. Tell me if something looks off.
  • Known bug: glass panes in groups of four can show a glitch with rain and snow. It is being fixed.
  • If you build a roof over a window in another chunk section, the window keeps getting rain until its chunk is rebuilt.
  • Not tested with Nvidium yet.

Questions, ideas or bugs? Come by on Discord.


A note, for honesty: I wrote this description in Italian and had AI translate and lay it out. AI also wrote part of the code, such as the rain simulation where the drops meet and merge, and the port from 26.3 to 1.21.1 (Fabric and NeoForge). So far I have only reviewed the code quickly: I'm a design student and right now I don't have the time to go through all of it properly. When I do, updates will follow to fix or optimize whatever needs it. And the Vanilla (16x) look doesn't fully convince me yet, so it may still change in later versions.

Project description from CurseForge.

Pick your setup

Weather Glass by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

10 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Weather Glass versions and loaders

3 of 34 releases match
Clear filters

Looking for an older file? The official CurseForge project page is in Resources.