Back to mods
GugleCarpetAddition project artwork

CurseForge · Minecraft mod

GugleCarpetAddition

Gugle's Carpet Addition

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which GugleCarpetAddition release should I use?

Updated yesterday
Latest stable file GCA v2.12.9+build.104
Game version 1.21, 1.20.2, 1.21.8
Loader Fabric, Quilt

GugleCarpetAddition GCA v2.12.9+build.104 targets 1.21, 1.20.2, 1.21.8 with Fabric, Quilt. The project page does not say whether this file belongs on the client, dedicated server, or both. All 1 required mods have matching files.

Where it goes

Is GugleCarpetAddition required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release Fabric, Quilt
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does GugleCarpetAddition GCA v2.12.9+build.104 need?

GCA v2.12.9+build.104. Change the file and its required mods may change too.

All 1 required mods have matching files

Install Carpet first. We found matching files for this game-version and loader setup.

Carpet Needed by GugleCarpetAddition GCA v2.12.9+build.104
required
Matching file found Matched file: Carpet v26.3 for 26.3

We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add GugleCarpetAddition without breaking your instance.

Built for GugleCarpetAddition GCA v2.12.9+build.104. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use GCA v2.12.9+build.104. It targets 1.21, 1.20.2, 1.21.8 with Fabric, Quilt; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    Install Carpet first. We found matching files for this game-version and loader setup.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside GCA v2.12.9+build.104. It opens that exact file at the source.

About this project

What does GugleCarpetAddition add?

Gugle's Carpet Addition

Mod Build Modrinth downloads GitHub downloads

menu

GCA

Note:

To run GCA on NeoForge with Sinytra Connector, download the required compatibility plugin from the NeoForge Sinytra compatibility release.

If you need GCA for Minecraft 1.13, please click here.

gcaPageSize

Set the number of entries per page on GCA list pages

  • Type: int
  • Default: 8
  • Options: Any positive integer
  • Categories: GCA
/carpet [setDefault] gcaPageSize 10

openFakePlayerInventory

Allow player to open the fake player's inventory

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] openFakePlayerInventory true

Usage: Right-click on a fake player to open their inventory

inv

openRealPlayerInventory

Allow player to open the real player's inventory

  • Type: String
  • Default: false
  • Options: true, false, ops, 0, 1, 2, 3, 4
  • Categories: GCA, experimental
/carpet [setDefault] openRealPlayerInventory true
/carpet [setDefault] openRealPlayerInventory ops

Usage: Right-click on other real players to open their inventory, requires appropriate permission level

openFakePlayerEnderChest

Allow player to open the fake player's ender chest

  • Type: String
  • Default: false
  • Options: ender_chest, true, false
  • Categories: GCA, BOT
/carpet [setDefault] openFakePlayerEnderChest true
/carpet [setDefault] openFakePlayerEnderChest ender_chest

Usage: Sneak (hold Shift) + right-click on a fake player to open their ender chest

ender

fakePlayerResident

Keep the fake player when exiting the level

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerResident true

fakePlayerReloadAction

Keep the fake player action when exiting the level

  • Type: boolean
  • Default: true
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerReloadAction false

fakePlayerAutoRespawn

Make the fake player automatically respawn after death

  • Type: String
  • Default: false
  • Options: spawn, death, setting, false
  • Categories: GCA, BOT, experimental

spawn: Respawning at the spawn point.

death: Respawning at the death location.

setting: Respawning at the location stored in the bot list. If the fake player is not in the bot list, the death mode will be used.

/carpet [setDefault] fakePlayerAutoRespawn <spawn|death|setting>

fakePlayerAutoReplenishment

Make fake player to auto replenishment

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerAutoReplenishment true

fakePlayerAutoReplenishmentFormShulkerBox

Make fake player to auto replenishment from shulker box

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerAutoReplenishmentFormShulkerBox true

fakePlayerAutoFish

Make fake player to auto fish. When the fishing hook catches a fish, it will automatically reel in and cast again.

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerAutoFish true

Usage: Let the fake player hold a fishing rod and use /player <name> use to start fishing. The fake player will automatically complete the reel-in and cast operations.

fakePlayerAutoReplaceTool

Make fake player to auto replace almost damaged tool

  • Type: String
  • Default: false
  • Options: true, false, keep
  • Categories: GCA, BOT

true: Tools with Mending will keep 10 durability; other tools will automatically be replaced after they break.

keep: All tools will keep 10 durability.

/carpet [setDefault] fakePlayerAutoReplaceTool <true|keep>

fakePlayerToolDamagedNotification

Broadcast a server-wide message when a fake player's tool breaks or when restocking fails (May cause message spam)

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerToolDamagedNotification true

fakePlayerPrefixName

Fake Player Prefix Name

  • Type: String
  • Default: #none
  • Options: #none, bot_
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerPrefixName bot_
/carpet [setDefault] fakePlayerPrefixName #none

fakePlayerSuffixName

Fake Player Suffix Name

  • Type: String
  • Default: #none
  • Options: #none, _fake
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerSuffixName _fake
/carpet [setDefault] fakePlayerSuffixName #none

fakePlayerForceOfflineUUID

Force fake players to use offline UUIDs (requires allowSpawningOfflinePlayers enabled)

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, BOT
/carpet [setDefault] fakePlayerForceOfflineUUID true

Disabling this feature requires clearing usercache.json and restarting the server/client to switch back to online UUIDs.

commandBot

A Bot Management Menu for saving, loading, and grouping fake players

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, BOT, command
/carpet [setDefault] commandBot ops

Command Usage:

/bot                                    # Show saved bot list
/bot list [page]                        # Show bot list with pagination
/bot add <player> <desc>                # Save current online fake player (including position, actions, etc.)
/bot load <player>                      # Load saved fake player
/bot remove <player>                    # Delete saved fake player
/bot group                              # Show bot group list
/bot group create <name>                # Create bot group
/bot group remove <name>                # Delete bot group
/bot group add <bot> <group>            # Add bot to group
/bot group load <group>                 # Load all bots in group
/bot group unload <group>               # Unload all bots in group
/bot group info <group>                 # View group details
/bot group generated <name> <count> [load]  # Batch generate bots and group them

Bot Controller

Use /bot controller to customize buttons on a fake player's extra control panel. Buttons can be configured globally or for an individual fake player. An individual setting overrides the global setting when both use the same slot.

Slots 3 through 26 are available. Clicking a button runs the configured /player <player> <action> command using the target fake player's name, so <action> should contain only the part after the player name. For example, attack continuous runs /player <player> attack continuous.

Command Usage:

/bot controller                                             # Show the global button list
/bot controller list [player]                               # Show global buttons or the effective buttons for a player
/bot controller global set <slot> <desc> <action>           # Set a global button
/bot controller global clear <slot>                         # Clear a global button from a slot
/bot controller global clear all                            # Clear all global buttons
/bot controller player <player> set <slot> <desc> <action>  # Set a button for one fake player
/bot controller player <player> clear <slot>                # Clear one button for a fake player
/bot controller player <player> clear all                   # Clear all buttons for a fake player

Examples:

/bot controller global set 3 "Continuous Attack" attack continuous
/bot controller player Steve set 4 "Continuous Use" use continuous

Enable openFakePlayerInventory or openFakePlayerEnderChest, then sneak and right-click a fake player to open the extra control panel. When the fake player's ender chest is enabled, the control buttons appear above its contents. Button descriptions containing spaces must be enclosed in double quotes.

commandBotAction

A Bot Action Management Menu for adding/removing actions and setting startup actions for bots

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, BOT, command
/carpet [setDefault] commandBotAction ops

Command Usage:

/bot action <bot>                       # View bot's action list
/bot action <bot> add <action>          # Add action to bot
/bot action <bot> remove <id>           # Remove action from bot
/bot action <bot> startup set <action>  # Set bot's startup action
/bot action <bot> startup clear         # Clear bot's startup actions

commandTodo

A Todo Management Menu with support for adding, removing, and marking completion

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, command
/carpet [setDefault] commandTodo ops

Command Usage:

/todo                           # Show todo list
/todo list [page]               # Show todo list with pagination
/todo add <desc>                # Add new todo item
/todo remove <id>               # Remove todo item
/todo success <id> [true/false] # Mark todo as done/undone

commandHere

Quickly broadcast your current position to all players and add glowing effect to yourself

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, command
  • Conditions: Only works when CarpetAmsAddition is NOT loaded
/carpet [setDefault] commandHere ops

Command Usage:

/here   # Broadcast your coordinates, showing current dimension and converted coordinates
        # Also outputs Xaero's Minimap compatible waypoint format

commandWhereis

Quickly locate players and add glowing effect to target

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, command
/carpet [setDefault] commandWhereis ops

Command Usage:

/whereis <player>   # Query specified player's location
/vris <player>      # Alias, same function

commandLoc

A Location Management Menu for saving, viewing, and deleting location points

  • Type: String
  • Default: ops
  • Options: ops, 0, 1, 2, 3, 4, true, false
  • Categories: GCA, command
/carpet [setDefault] commandLoc ops

Command Usage:

/loc                    # Show location list
/loc list [page]        # Show locations with pagination
/loc add <desc>         # Add location at current position
/loc remove <id>        # Remove specified location
/loc info <id>          # View location details (including dimension converted coordinates)

commandWlist

Whitelist Management, allows authorized regular players to manage the whitelist

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, command
/carpet [setDefault] commandWlist true

Command Usage:

/wlist                              # Show current whitelist
/wlist add <player>                 # Add player to whitelist
/wlist remove <player>              # Remove player from whitelist
/wlist permission add <player>      # Grant player whitelist management permission (OP only)
/wlist permission remove <player>   # Revoke player's whitelist management permission (OP only)

commandBlist

Banned List Management

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, command
/carpet [setDefault] commandBlist true
/blist

commandSop

Simple op get

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, command
/carpet [setDefault] commandSop true
/sop

commandSeed

Sets the required permission level for the /seed command

  • Type: String
  • Default: vanilla
  • Options: vanilla, true, false, ops, 0, 1, 2, 3, 4
  • Categories: GCA, command
/carpet [setDefault] commandSeed ops
/carpet [setDefault] commandSeed 0

betterFenceGatePlacement

Make the placed fence gate have the same block status as the fence gate you clicked

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] betterFenceGatePlacement true

betterWoodStrip

Only the axe with "Strip" in its name is allowed to peel logs

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] betterWoodStrip true

betterSignInteraction

Make the block attached to the sign interact when you right-click it

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] betterSignInteraction true

betterItemFrameInteraction

Make the block attached to the ItemFrame interact when you right-click it

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] betterItemFrameInteraction true

betterQuickCrafting

Keep an item in the inventory during quick crafting

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, experimental
/carpet [setDefault] betterQuickCrafting true

simpleInGameCalculator

Simple In-Game Calculator

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] simpleInGameCalculator true

fastPingFriend

Fast ping friend

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] fastPingFriend true

qnmdLC

What is the height value for setting the LC value

  • Type: int
  • Default: -1
  • Categories: GCA, experimental
/carpet [setDefault] qnmdLC 64
/carpet [setDefault] qnmdLC -1

fixedEndCrystalSync

Fixed End Crystal Sync

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, experimental
/carpet [setDefault] fixedEndCrystalSync true

welcomePlayer

Welcome Player

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA
/carpet [setDefault] welcomePlayer true

Detailed welcome message configuration guide

wanderingTraderSpawnFailedWarning

Wandering Trader Spawn Failed Warning

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, experimental
/carpet [setDefault] wanderingTraderSpawnFailedWarning true

wanderingTraderSpawnRemind

Wandering Trader Spawn Remind

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, experimental
/carpet [setDefault] wanderingTraderSpawnRemind true

commandTransfer

/transfer command

  • Type: boolean
  • Default: false
  • Options: true, false
  • Categories: GCA, command
  • Conditions: Requires Minecraft >= 1.21
/carpet [setDefault] commandTransfer true
/transfer <server> [port]

commandTick

Fix Carpet's /tick command permission

  • Type: String
  • Default: 3
  • Options: true, false, ops, 0, 1, 2, 3, 4
  • Categories: GCA, command, experimental
  • Conditions: Requires Minecraft >= 1.20.3
/carpet [setDefault] commandTick 3

fakePlayerLocatorBar

Display Fake Player Positions On The Locator Bar

  • Type: boolean
  • Default: true
  • Options: true, false
  • Categories: GCA, command, BOT
  • Conditions: Requires Minecraft >= 1.21.6
/carpet [setDefault] fakePlayerLocatorBar true

Project description from CurseForge.

Pick your setup

GugleCarpetAddition by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

48 available setups

Showing the newest 12 of 24 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

GugleCarpetAddition versions and loaders

50 of 50 releases match

Looking for an older file? The official CurseForge project page is in Resources.