modpacks.ch by CreeperHost No ads. Just mods.
Back to mods
TLPath project artwork

Vintage Story Mod DB · Vintage Story mod

TLPath

🧭 TLPath — Smart Translocator GPS Plot the most optimal routes right in the game. The smart compass guides you through nearby Translocators, rebuilds the path on the fly, and tracks your real progress like a real GPS. 🎯 Smart Routing Dijkstra finds the f

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which TLPath release matches 1.22.0-rc.3?

Updated 2 months ago
Best match for your filters 2.0.2
Game version 1.22.0-rc.1, 1.22.0-rc.2, 1.22.0-rc.3
Loader Built-in Vintage Story mod system

TLPath 2.0.2 targets 1.22.0-rc.1, 1.22.0-rc.2, 1.22.0-rc.3. It must be installed on the client. Do not install it on the dedicated server. No extra mods listed for this file.

Where it goes

Is TLPath required on the client, server, or both?

It must be installed on the client. Do not install it on the dedicated server.

Client Required
Dedicated server Not supported
Loader for this release Built-in Vintage Story mod system
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

This Vintage Story file is marked client-only.

Understand Vintage Story dependencies Read the Vintage Story installation guide

What else does TLPath 2.0.2 need?

2.0.2 on 1.22.0-rc.3. Every mod below is checked against that same setup.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add TLPath without breaking your instance.

Built for TLPath 2.0.2 on 1.22.0-rc.3. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use 2.0.2. It targets 1.22.0-rc.1, 1.22.0-rc.2, 1.22.0-rc.3; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    It must be installed on the client. Do not install it on the dedicated server.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside 2.0.2. It opens that exact file at the source.

About this project

What does TLPath add?

🧭 TLPath — Smart Translocator GPS

Plot the most optimal routes right in the game. The smart compass guides you through nearby Translocators, rebuilds the path on the fly, and tracks your real progress like a real GPS.

 

🎯
Smart Routing
Dijkstra finds the fastest path through TLs and walking segments. Skip a TL, change direction — route updates instantly.
📊
Live Counter
HUD shows TL 3/7, dist=142. Forward TL +1, backward TL −1. Counts any TL pair you use.
🛰️
GPS Mode
Route recalculates every few seconds from your current position. Shortcuts are picked up automatically — no manual refresh.
⭐
Favourites & History
Save destinations, jump back to recent ones in one click. Full route list with skip-TL controls.

 

What you see on screen
TL 3/7, dist=142
| | | N | | | | | E | | |
Target: 640 20 6522

 

🪟 Navigation Window

Press N or type .tlpath gui to open.

📍 Navigate
Enter X / Z, hit Find Route. Save destination as favourite on the fly.
🛤️ Route
Full waypoint list. Skip individual TLs and recalc around them.
⭐ Favourites
Your saved destinations. One click to go.
🕒 History
Recent destinations with Go and Save buttons.
⚙️ Settings
Walk radius, data source, idle compass, language (EN/RU), manual refresh.

 

🗺️ Where the TL data comes from

TLPath needs a list of all Translocators on your server. Pick whichever fits your setup — both work, you can switch in Settings:

🌐 Option A — Online map
If your server runs an online map, paste the translocators.geojson URL in Settings or via .tlpath link <url>.
🧙 Option B — Waypointer mod
Got Waypointer installed? Switch source to Waypointer in Settings — TLPath will use the TLs your client has already discovered. No server-side map required.

 

⌨️ Commands

.tlpath find <x> <z> — plot a route to coordinates
.tlpath stop — stop and clear the current route
.tlpath walk <units> — set the walking radius between TLs
.tlpath link [url] — show or set the GeoJSON URL
.tlpath show — toggle the idle compass on/off
.tlpath fav <name> — save the current destination as favourite
.tlpath gui — open the navigation window (hotkey: N)

 

💡 Tips

Wrong TL? Just keep walking — the route rebuilds itself within a few seconds.
Went backward through a TL? Counter ticks back down and the compass points to the TL you should re-enter.
Broken or unwanted TL? Use Skip TL in the Route tab to force the path around it.
Long gaps between TLs? Increase the walk radius in Settings so distant TLs can still be linked on foot.

 

Created thanks to RaidenFumo, whose navigator served as the foundation and inspiration for this project.

Project description from Vintage Story Mod DB.

Pick your setup

TLPath releases for each Vintage Story version.

Choose the version and loader you play, then open the matching release.

13 available setups

Showing the newest 12 of 13 game versions. Older files are in the list below.

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

TLPath versions and loaders

2 of 10 releases match
Clear filters

Looking for an older file? The official Vintage Story Mod DB project page is in Resources.

Keep browsing

See more mods

Like this one? One of these might be worth a look.