Back to mods
EverCrops: Dynamic Trees project artwork

CurseForge · Minecraft mod

EverCrops: Dynamic Trees

Dynamic Trees' trees keep growing while you're away.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which EverCrops: Dynamic Trees release matches 1.20.1 Forge?

Updated 4 months ago
Best match for your filters evercrops-dynamictrees-1.20.1-2.0.0.jar
Game version 1.20.1
Loader Forge

EverCrops: Dynamic Trees evercrops-dynamictrees-1.20.1-2.0.0.jar targets 1.20.1 with Forge. The project page does not say whether this file belongs on the client, dedicated server, or both. All 3 required mods have matching files.

Where it goes

Is EverCrops: Dynamic Trees required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release Forge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does EverCrops: Dynamic Trees evercrops-dynamictrees-1.20.1-2.0.0.jar need?

evercrops-dynamictrees-1.20.1-2.0.0.jar on 1.20.1 Forge. Every mod below is checked against that same setup.

All 3 required mods have matching files

Install EverCrops, Dynamic Trees, GottschCore first. We found matching files for this game-version and loader setup. 2 come through another mod in the chain.

2 listed on this file 2 pulled in by those mods
EverCrops Needed by EverCrops: Dynamic Trees evercrops-dynamictrees-1.20.1-2.0.0.jar
required
Matching file found Matched file: evercrops-1.20.1-4.4.0.jar
Dynamic Trees Needed by EverCrops: Dynamic Trees evercrops-dynamictrees-1.20.1-2.0.0.jar
required
Matching file found Matched file: DynamicTrees-1.20.1-1.4.11.jar
GottschCore Needed by EverCrops
pulled in
Matching file found Matched file: gottschcore-1.20.1-2.10.0.jar
Dynamic Trees Plus Needed by Dynamic Trees
pulled in
Matching file found Matched file: DynamicTreesPlus-1.20.1-1.2.2.jar

2 extra mods were pulled in by other dependencies. Indented rows show who needs each one. We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add EverCrops: Dynamic Trees without breaking your instance.

Built for EverCrops: Dynamic Trees evercrops-dynamictrees-1.20.1-2.0.0.jar on 1.20.1 Forge. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use evercrops-dynamictrees-1.20.1-2.0.0.jar. It targets 1.20.1 with Forge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    Install EverCrops, Dynamic Trees, GottschCore first. We found matching files for this game-version and loader setup. 2 come through another mod in the chain.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside evercrops-dynamictrees-1.20.1-2.0.0.jar. It opens that exact file at the source.

About this project

What does EverCrops: Dynamic Trees add?

Dynamic Trees' trees keep growing while you're away.

This is an expansion for EverCrops that adds catch-up growth support for Dynamic Trees. Install all three together — EverCrops handles the vanilla crops, Dynamic Trees provides the trees, and this expansion makes those trees grow even when nobody's nearby.


How it works

Dynamic Trees, like vanilla, only grows trees while their chunk is loaded. EverCrops: Dynamic Trees doesn't simulate growth on unloaded chunks (that would be expensive and laggy). Instead, it tracks when each tree last ticked, and on the next random tick after the chunk reloads, it catches the tree up based on how much game time has elapsed.

Walk away for an hour, a day, a week — when you come back and the area reloads, your trees advance as if they had been growing the whole time. A sapling you planted before heading out can be a full tree when you return.

Growth is real Dynamic Trees growth. Catch-up runs the exact same growth logic Dynamic Trees would have run normally — it just runs the steps that were missed. That means all of Dynamic Trees' own rules still apply: soil fertility, light, biome suitability, and space to grow. A tree that wouldn't have grown if you'd been standing there won't be force-grown by catch-up either.

Fully-loaded areas only. Trees only catch up once the area around them has finished loading, so the missed growth is applied correctly instead of being skipped the instant a chunk pops in.

Pre-existing trees: Trees that already existed in your world before this mod was installed get registered the first time their chunk reloads near you, so they'll start catching up from that point forward (no retroactive growth burst for trees planted before install).

Note: In singleplayer, the world only ticks while you're playing. Catch-up is based on in-game time elapsed, not real-world time, so closing the game and coming back tomorrow won't fast-forward your forest.


What's covered

  • 🌳 Grown trees — keep expanding toward their full size while their chunk is unloaded, picking up every growth step they missed.
  • 🌱 Saplings — sprout into trees while you're away, instead of waiting frozen until you walk back.

Both newly planted and long-established trees are tracked automatically.


Settings

A server config lets you tune catch-up to your world:

  • Catch-up on/off — master switch for the whole feature.
  • Catch-up speed — tune how fast trees catch up to match your Dynamic Trees treeGrowthMultiplier.
  • Sapling catch-up on/off — turn just the sapling side on or off, independently of grown trees.
  • Auto-cleanup — a quiet background pass that forgets trees which have been chopped down or died, so the mod stays light and doesn't track things that aren't there anymore.

Admin commands

Server operators (permission level 2) get a /evercropsDT command set for testing and troubleshooting:

  • /evercropsDT inspect [x y z] — show what a tree is tracking, including its current soil fertility, so you can see exactly why it is or isn't growing.
  • /evercropsDT simulate <ticks> <radius> — fast-forward tracked trees by a chosen amount of time.
  • /evercropsDT tick <radius> — apply pending catch-up immediately.
  • /evercropsDT register <radius> — hand-register nearby trees (handy in testing).
  • /evercropsDT cleanup — remove tracking entries for trees that no longer exist.

Compatibility

This mod uses only @Inject mixins — no overwrites, no replacements. It introduces no custom blocks and no block entities; its tracking data lives in its own per-dimension evercrops_dynamictrees.dat file, separate from your world's other data.

  • ✅ Requires the EverCrops base mod and Dynamic Trees
  • ✅ Server-side friendly (clients don't need it installed for the growth logic to work)
  • ✅ Respects all of Dynamic Trees' own growth conditions — catch-up never grows a tree further than Dynamic Trees itself would have

Companion mods

  • EverCrops — required; handles vanilla crops (wheat, carrots, melons, sugar cane, saplings, and more)
  • EverCrops: Farmer's Delight — catch-up growth for Farmer's Delight crops and blocks
  • EverFurnace — give the same catch-up treatment to your furnaces, blast furnaces, and smokers
  • EverHopper — give the same catch-up treatment to your hoppers

License

Licensed under LGPL-3.0. Source available on GitHub.

Project description from CurseForge.

Pick your setup

EverCrops: Dynamic Trees by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

2 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

EverCrops: Dynamic Trees versions and loaders

4 of 8 releases match
Clear filters

Looking for an older file? The official CurseForge project page is in Resources.