Back to mods
Ender IO: Pressure Conduits project artwork

CurseForge · Minecraft mod

Ender IO: Pressure Conduits

Adds high-performance Pressure Conduits to Ender IO, allowing for instant, lossless, and zero-volume air pressure transport for your PneumaticCraft machines.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Ender IO: Pressure Conduits release should I use?

Updated last month
Latest stable file eio_pressure_conduits-1.0.3-1.21.1.jar
Game version 1.21.1
Loader NeoForge

Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar targets 1.21.1 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. All 2 required mods have matching files.

Where it goes

Is Ender IO: Pressure Conduits required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release NeoForge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar need?

eio_pressure_conduits-1.0.3-1.21.1.jar. Change the file and its required mods may change too.

All 2 required mods have matching files

Install Ender IO, PneumaticCraft: Repressurized first. We found matching files for this game-version and loader setup. 21 come through another mod in the chain.

3 listed on this file 21 pulled in by those mods
Ender IO Needed by Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar
required
Matching file found Matched file: Ender IO - v8.2.14-beta
Jade 🔍 Optional for Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar
optional
Matching file found Matched file: [NeoForge 1.21.1] 15.10.6
PneumaticCraft: Repressurized Needed by Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar
required
Matching file found Matched file: "PneumaticCraft: Repressurized" 8.2.24 MC-1.21.1
Just Enough Items (JEI) Needed by Ender IO
pulled in
Matching file found Matched file: 19.71.0.470 for NeoForge 1.21.1
Athena Needed by Ender IO
pulled in
Matching file found Matched file: [NeoForge] Athena 4.0.6
Applied Energistics 2 Needed by Ender IO
pulled in
Matching file found Matched file: AE2 19.2.20 [NEOFORGE]
Mekanism Needed by Ender IO
pulled in
Matching file found Matched file: Mekanism-1.21.1-10.7.19.85.jar
CC: Tweaked Needed by Ender IO
pulled in
Matching file found Matched file: cc-tweaked-1.21.1-forge-1.113.1.jar
Patchouli Needed by PneumaticCraft: Repressurized
pulled in
Matching file found Matched file: Patchouli-1.21.1-93-NEOFORGE.jar
ConnectedTexturesMod Needed by PneumaticCraft: Repressurized
pulled in
Matching file found Matched file: CTM - 1.21-1.2.1+3
MezzConfigGUI Needed by Just Enough Items (JEI)
pulled in
Matching file found Matched file: MezzConfig GUI mc1.21.1-0.7.1 for NeoForge
MezzConfig Needed by Just Enough Items (JEI)
pulled in
Matching file found Matched file: MezzConfig 0.7.1 for NeoForge 1.21.1
EMI Needed by Applied Energistics 2
pulled in
Matching file found Matched file: emi-1.1.24+1.21.1+neoforge
The One Probe Needed by Applied Energistics 2
pulled in
Matching file found Matched file: TheOneProbe - 1.21_neo-12.0.9
WTHIT Needed by Applied Energistics 2
pulled in
No matching file
GuideME Needed by Applied Energistics 2
pulled in
Matching file found Matched file: GuideME 21.1.22
JEITweaker Needed by Mekanism
pulled in
No matching file
WTHIT Forge Edition Needed by Mekanism
pulled in
Matching file found Matched file: [NeoForge 1.21.1] 12.10.3
Biomes O' Plenty Needed by Mekanism
pulled in
Matching file found Matched file: Biomes O' Plenty NeoForge 1.21.1-21.1.0.14
OpenComputers II Needed by Mekanism
pulled in
Matching file found Matched file: oc2-MC1.21.1-0.12.1
Flux Networks Needed by Mekanism
pulled in
Matching file found Matched file: Flux-Networks-1.21.1-8.0.0

21 extra mods were pulled in by other dependencies. Indented rows show who needs each one. We only count dependency files that match this setup. A file for another loader does not fill the gap.

Before you install it

Add Ender IO: Pressure Conduits without breaking your instance.

Built for Ender IO: Pressure Conduits eio_pressure_conduits-1.0.3-1.21.1.jar. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use eio_pressure_conduits-1.0.3-1.21.1.jar. It targets 1.21.1 with NeoForge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    Install Ender IO, PneumaticCraft: Repressurized first. We found matching files for this game-version and loader setup. 21 come through another mod in the chain.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside eio_pressure_conduits-1.0.3-1.21.1.jar. It opens that exact file at the source.

About this project

What does Ender IO: Pressure Conduits add?

Ender IO: Pressure Conduits

⚠️ NOTICE: This mod has been merged into Ender IO More Conduits! Future updates and new features will only be provided in the merged mod. Please download the new mod instead!

(Unofficial Ender IO Add-on / PneumaticCraft Integration)

Please scroll down for the Chinese Description. / 中文介绍请向下滑动查看。


🇬🇧 English Description

Core Features

  • PneumaticCraft Integration: Adds Basic, Reinforced, and Advanced Pressure Conduits to transfer compressed air.
  • Zero Volume & Thermodynamic Balancing: Perfectly sealed with zero internal volume. Air transfer is dynamically calculated by pressure differences, eliminating pressurization delays and ghost vacuums.
  • Overpressure Explosions: Conduits will realistically explode if the connected machine's pressure exceeds their maximum threshold (can be disabled in config).
  • Full Ender IO Integration: Coexists with other conduits in a single block space. Fully supports 16 color channels, Redstone control, and Facades.

📜 License & Modpack Policy

  • Copyright (c) Saku_rain - ALL RIGHTS RESERVED
  • Modpack Policy: You are completely free to include this mod in your modpacks via official platforms.

🇨🇳 中文介绍

⚠️ 重要提示:本模组已被正式合并至 Ender IO More Conduits (末影接口:更多导管) 模组中! 未来所有的更新与新功能都将仅在新模组中进行,请前往下载新模组!

模组核心特性

  • 气动工艺联动: 新增基础、强化与高级气压导管,支持原位平滑升级。
  • 零体积与热力学平衡: 绝对密封且不占体积,底层严格按照压差与物理体积动态计算平衡,彻底消除庞大管网带来的充气延迟与气压震荡。
  • 超压防爆机制: 若相连机器气压超过导管承压极限,导管将发生定向爆炸(可在配置中关闭)。
  • 深度融入 EIO 体系: 可与其他科技管线在同方块内共存。完美支持 16 色频道隔离、红石控制与导管伪装板。

📜 版权声明与整合包政策

  • 版权所有 (c) Saku_rain - 保留所有权利 (ALL RIGHTS RESERVED)
  • 整合包政策: 只要通过合规的官方平台发布,非常欢迎将本模组加入到您的整合包中。

Project description from CurseForge.

Pick your setup

Ender IO: Pressure Conduits by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

2 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Ender IO: Pressure Conduits versions and loaders

7 of 7 releases match

Looking for an older file? The official CurseForge project page is in Resources.