Back to mods
Create: Pneumatic Logistics project artwork

CurseForge · Minecraft mod

Create: Pneumatic Logistics

A Create addon that links your vaults, chests and barrels with brass tubes and a rotation-powered hub, so you can browse, take, store and craft from all of it at one terminal.

Choose a version Pick your version below, then grab the matching file.

Quick answer

Which Create: Pneumatic Logistics release should I use?

Updated 2 days ago
Latest stable file pneumaticlogistics-0.1.7
Game version 1.21.1
Loader NeoForge

Create: Pneumatic Logistics pneumaticlogistics-0.1.7 targets 1.21.1 with NeoForge. The project page does not say whether this file belongs on the client, dedicated server, or both. No extra mods listed for this file.

Where it goes

Is Create: Pneumatic Logistics required on the client, server, or both?

The project page does not say whether this file belongs on the client, dedicated server, or both.

Client Source doesn’t say
Dedicated server Source doesn’t say
Loader for this release NeoForge
Required install it here Optional supported, not mandatory Not supported do not install here Source doesn’t say do not assume

The source does not explicitly classify this release as client-only or server-only.

What else does Create: Pneumatic Logistics pneumaticlogistics-0.1.7 need?

pneumaticlogistics-0.1.7. Change the file and its required mods may change too.

No extra mods listed for this file

This file does not list any required mods. Do not add a library just because a different file uses it.

This file does not list any required or optional mods.

Before you install it

Add Create: Pneumatic Logistics without breaking your instance.

Built for Create: Pneumatic Logistics pneumaticlogistics-0.1.7. Pick another file and the loader, install side or required mods may change.

  1. 01

    Stick to this file

    Use pneumaticlogistics-0.1.7. It targets 1.21.1 with NeoForge; another release may have different loader, side or dependency requirements.

  2. 02

    Bring the mods it needs

    This file does not list any required mods. Do not add a library just because a different file uses it.

  3. 03

    Put it on the correct side

    The project page does not say whether this file belongs on the client, dedicated server, or both.

  4. 04

    Pick the file you checked

    Use the “Get this file” button beside pneumaticlogistics-0.1.7. It opens that exact file at the source.

About this project

What does Create: Pneumatic Logistics add?

Create: Pneumatic Logistics

A storage network for Create. Run brass tubes through your base, connect your existing vaults, chests and barrels to a central hub, and get at everything from one terminal. It works like the storage networks in AE2 or Refined Storage, but it is built from Create parts, runs on rotational power, and looks like it belongs next to your other Create machines.

Your items stay where they are. The mod does not move them into special drives: it indexes the inventories you already have, so belts, funnels and hoppers keep working on them.

What you get

Pneumatic Hub: the controller of the network. It takes a shaft from below and needs 32 RPM and 1024 su to run. One hub runs one network and serves 8 devices. Without power, nothing moves and nothing is lost.

Hub Extension: place it against the hub to add 8 more device channels and more faces to attach tubes to. Up to three, for 32 channels.

Brass Tube: the main line. It carries items between the hub, your terminals and the andesite branches. Brass tubes look and behave like Create's fluid pipes: wrench one to turn it into a glass tube and watch items travel through it, or put Brass Casing on it to lock its connections so tubes can run side by side without joining.

Andesite Tube: the small tube, like a thin cable next to a thick one. It is the only tube that connects to Storage Ports and Export Ports, so it runs the last stretch from your brass main line to each port. Where it meets brass, the brass flange steps down to the andesite tube's collar. Each andesite tube carries the channels of at most 2 devices, so keep your long runs in brass.

Storage Port: a slim fitting, about the size of an AE2 storage bus, that clamps onto any inventory: Create Item Vaults, chests, double chests, barrels, shulker boxes and storage from other mods. Everything inside shows up in your terminals. Each port has a name, a priority and a filter slot, so you can dedicate a vault to ores or food. A port comes without a tube. Right-click it with an Andesite Tube to fit one through it, and it then takes andesite tubes on all five free faces. Take the tube back out with a Wrench.

Export Port (called the Requester up to 0.1.6): the same slim fitting, for a machine or chest. It has two halves you can switch on separately, each with its own filter:

  • Send: terminals deliver items into the inventory it faces, travelling through the tubes.
  • Receive: it pulls items out of that inventory and sends them back into storage.

Use one to feed a machine, one to collect its output, or both at once.

Terminal and Crafting Terminal: open one to see every item in every connected inventory in a single searchable, sortable list.

  • Click to take a stack, right-click for half, shift-click to send it to your inventory, and click with an item in hand to store it. Transfers are instant.
  • The Crafting Terminal adds a 3x3 grid that refills itself from storage after each craft, shift-click crafting, and JEI recipe transfer with the + button.

Terminal Panel and Crafting Terminal Panel: flat, wall-mounted versions of both terminals for tidy builds. All terminals can be switched between a brass and an andesite casing look.

Brass Pocket Terminal (new in 0.1.7): a terminal you carry, like AE2's wireless terminal.

  • Sneak-right-click a Terminal, Crafting Terminal or panel to link it. Then right-click anywhere within 64 blocks of it to open its screen: take, store and search as if you were standing at it.
  • It works through the linked terminal, so the hub must be running and the terminal's chunk loaded.
  • The range is configurable on the server, and 0 means anywhere in the same dimension.
  • Crafted from a Terminal, a Precision Mechanism, brass sheets and an Ender Pearl.

How it plays

  1. Power a Pneumatic Hub with a shaft from below.
  2. Run brass tubes from the hub past your storage.
  3. Put a Storage Port on each vault or chest, right-click it with an Andesite Tube, and run andesite tube from the port to the brass line.
  4. Place a Terminal on the tube line and open it.

From then on you can find anything you own by typing its name, craft straight from storage, and have machines fed and emptied automatically. Link a Pocket Terminal and you can do it from anywhere in your base.

Every block has a Ponder scene (hold W on the item) explaining how to use it.

Details

  • Storing items follows your rules: filtered inventories first, then priority, then fullest or emptiest first.
  • Items sent to an Export Port physically travel through the tubes at 8 blocks per second. Breaking a tube drops what was inside it.
  • The network keeps working across unloaded chunks: items wait at the edge and continue when the area loads.
  • Lightweight by design: tubes have no block entities and never tick. The hub does all the work, with a cap on work per tick. Each release is profiled under load before it ships.
  • All balance values are configurable.
  • Updating keeps your world working. Storage Ports and Requesters placed in 0.1.6 or earlier keep working exactly as before, on brass or andesite. Only ports you place from 0.1.7 on follow the new andesite-only rule. To move an old port onto the new rules, break it and place it again.

Requirements

  • Minecraft 1.21.1, NeoForge
  • Create 6.0.10 or newer
  • JEI is optional, for recipe transfer in the Crafting Terminal

About this mod

This mod's code and artwork were written with an AI coding assistant (Claude), directed and tested by me. It reuses Create's own pipe and casing models and textures as they are loaded in your game, recoloured at load time, and ships none of Create's art. It is not affiliated with or endorsed by the Create team.

Changelog

0.1.7

  • Storage Port: redesigned as a slim fitting the size of an AE2 storage bus. It no longer has a tube built in. Right-click it with an Andesite Tube to fit one, and it then takes andesite tubes on all five free faces. A Wrench takes the tube back out.
  • Export Port: the Requester is renamed and gets the same slim design.
  • Ports: they now connect to Andesite Tubes only. The layout is: brass main line, then andesite branch, then port.
  • Andesite Tube: now a smaller tube. Where it joins brass, the brass flange steps down to an andesite collar.
  • New: Brass Pocket Terminal. Link it to a terminal, then open that terminal's screen from up to 64 blocks away (configurable).
  • Compatibility: ports and Requesters from older worlds keep working exactly as before, including on brass tubes. Nothing in an existing world needs rebuilding.
  • Ponder: scenes and tooltips updated for the new ports.

Project description from CurseForge.

Pick your setup

Create: Pneumatic Logistics by Minecraft version and loader

Choose the version and loader you play, then open the matching release.

1 available setups

Check the dependencies, then try the file in a copied instance before changing a world you care about.

Recent files

Create: Pneumatic Logistics versions and loaders

8 of 8 releases match

Looking for an older file? The official CurseForge project page is in Resources.